LOTUS ELISE S2 S 1.8L 16V TOYOTA 100kW/134HP EFI T4E

ECU EFI T4E · 136 CV (1 kW) · 1800 cc · Benzina aspirato

ECU-databaseLOTUS › LOTUS ELISE S2 S 1.8L 16V TOYOTA 100kW/134HP EFI T4E

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 2 firmwareversies

Voertuiggegevens

MerkLOTUS
ModelELISE S2
MotorS 1.8L 16V TOYOTA 100kW/134HP EFI T4E
Standaard vermogen136 CV / 1 kW
Cilinderinhoud1800 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantEFI
ModelT4E
Geheugen / EPROMMICRO BGA CON FLASH A BORDO 512K - 80000

Beschikbare tuning-opties:

  • Base timing
  • Lambda correction
  • Main injection
  • Fan activation threshold stage 1
  • Fan activation threshold stage 2
  • Fan activation threshold with engine off
  • Throttle angle limitation
  • VANOS inlet CAM at part load
  • Volumetric efficiency

Firmware-identificatoren (2)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
A120E6501FA131E0018 1.00.003 EFI T4E
B131E6018H K0407C131E6018H 1.00.016 EFI T4E

ECU-notities

MICRO MPC563 Warning! Lambda correction map, it is necessary to reduce the value to enrich the mixture. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata Warning! to properly exclude the lambda probe 2, after running the patch LAM2, you must disconnect the connector of lambda probe 2 after the cat.

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop