KAWASAKI Z 900 20->24 92kW

ECU DENSO 21175-154X · 125 CV (92 kW) · 900 cc · Benzina aspirato

ECU-databaseKAWASAKI › KAWASAKI Z 900 20->24 92kW

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 20 firmwareversies

Voertuiggegevens

MerkKAWASAKI
ModelZ 900
Motor20->24 92kW
Standaard vermogen125 CV / 92 kW
Cilinderinhoud900 cc
BrandstofBenzina aspirato
VoertuigtypeMoto

ECU

FabrikantDENSO
Model21175-154X
Geheugen / EPROMMicro RENESAS - 8192 Kbit -100000

Beschikbare tuning-opties:

  • Base timing - full power
  • Base timing - low power
  • Base timing - clutch/neutral
  • Load / throttle position reference
  • Exhaust valve management in deceleration - gear based - full power
  • Exhaust valve management in deceleration - gear based - low power
  • Exhaust valve management - gear based - full power
  • Exhaust valve management - gear based - low power
  • Engine idle vs. ECT sensor
  • Injection for IAP - full power
  • Injection for IAP - low power
  • Injection for TPS - full power
  • Injection for TPS - low power
  • RPM Limiter
  • RPM Limiter 2
  • Ram Air
  • Secondary throttle plates management in deceleration - gear based - full power
  • Secondary throttle plates management in deceleration - gear based - low power
  • Secondary throttle plates management - gear based - full power
  • Secondary throttle plates management - gear based - low power
  • Cooling fan activation
  • Traction control - activation sensitivity
  • Traction control - slip sensitivity
  • Traction control - TPS correction

Firmware-identificatoren (20)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
21175-1542KPL6KPE0 1.00.02149245-1544 DENSO 21175-154X
21175-1544KPL6KRE0 1.00.01449245-1546 DENSO 21175-154X
21175-1545KPL6KREA 1.00.02649245-1547 DENSO 21175-154X
21175-1546KPL6KPU0 1.00.01349245-1548 DENSO 21175-154X
21175-1547KPL6KPL0 1.00.00449245-1549 DENSO 21175-154X
21175-1549KPL6KPD0 1.00.00749245-1551 DENSO 21175-154X
21175-1551KPL6KPT0 1.00.01049245-1553 DENSO 21175-154X
21175-1553KPL6KPB0 1.00.01149245-1555 DENSO 21175-154X
21175-1552KPL6KPH0 1.00.01349245-1554 DENSO 21175-1554/1589
21175-1545KPN7KPE0 1.00.00349245-1613 DENSO 21175-1592/1594
21175-1592KPNAKPE0 1.00.00449245-1610 DENSO 21175-1592/1594
21175-1592KPN7KPE0 1.00.01649245-1610 DENSO 21175-1592/1594
21175-1594KPN7KRE0 1.00.00449245-1612 DENSO 21175-1592/1594
21175-1594KPNAKRE0 1.00.01249245-1612 DENSO 21175-1592/1594
21175-1595KPNAKREA 1.00.01549245-1613 DENSO 21175-1592/1594
21175-1595KPN8KREA 1.00.01149245-1613 DENSO 21175-1592/1594
21175-1848TPP2KPE0 1.00.01149245-2063 DENSO 21175-1840/1848/1851
21175-1850TPP2KPS0 1.00.00349245-2065 DENSO 21175-1840/1848/1851
21175-1851TPP2KRE0 1.00.00749245-2066 DENSO 21175-1840/1848/1851
21175-1852TPP2KREA 1.00.03549245-2067 DENSO 21175-1840/1848/1851

Technische voertuignotities

OBD placed under the saddle
ECU located under/near the tank. Difficulty: medium/high.

ECU-notities

Microprocessor SH7058 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Microprocessor SH7058 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata ATTENTION - 35kW reduced power version file.
Microprocessor SH7058 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata ATTENTION - 70kW reduced power version file.