KAWASAKI VERSYS 1100 25->26 99kW

ECU MITSUBISHI F8TG3xxx/TG4xxx/TG5xxx/TG6xxx · 135 CV (99 kW) · 1099 cc · Benzina aspirato

ECU-databaseKAWASAKI › KAWASAKI VERSYS 1100 25->26 99kW

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 4 firmwareversies

Voertuiggegevens

MerkKAWASAKI
ModelVERSYS 1100
Motor25->26 99kW
Standaard vermogen135 CV / 99 kW
Cilinderinhoud1099 cc
BrandstofBenzina aspirato
VoertuigtypeMoto

ECU

FabrikantMITSUBISHI
ModelF8TG3xxx/TG4xxx/TG5xxx/TG6xxx
Geheugen / EPROMMicro RENESAS core RH850

Beschikbare tuning-opties:

  • Base timing - full power
  • Base timing - low power
  • Base timing - medium power
  • Base timing - clutch/neutral
  • Engine brake
  • Injection for IAP - full power
  • Injection for IAP - low power
  • Injection for IAP - medium power
  • Max injection limit
  • Proportional distribution of injection - primary injectors
  • Proportional distribution of injection - secondary injectors
  • Injection for TPS - full power
  • Injection for TPS - low power
  • Injection for TPS - medium power
  • RPM Limiter
  • RPM Limiter 2
  • Secondary injection for IAP - full power
  • Secondary injection for IAP - low power
  • Secondary injection for IAP - medium power
  • Secondary injection for TPS - full power
  • Secondary injection for TPS - low power
  • Secondary injection for TPS - medium power
  • Throttle angle management - rain mode
  • Throttle angle management - road mode
  • Throttle angle management - sport mode
  • Cooling fan activation

Firmware-identificatoren (4)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
21175-2138 1.00.00649245-2403 MITSUBISHI F8TG3xxx/TG4xxx/TG5xxx/TG6xxx
21175-2157 1.00.00349245-2433 MITSUBISHI F8TG3xxx/TG4xxx/TG5xxx/TG6xxx
21175-2162 1.00.00249245-2438 MITSUBISHI F8TG3xxx/TG4xxx/TG5xxx/TG6xxx
21175-2364 1.00.01149245-2722 MITSUBISHI F8TG3xxx/TG4xxx/TG5xxx/TG6xxx

ECU-notities

Microprocessor R7F701201 This Setting File can be used for serial system NewGenius. This serial protocol supports identification and writing only. To work on this ECU you can use NewTrasdata