Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
2 firmwareversies
Voertuiggegevens
| Merk | KAWASAKI |
| Model | VERSYS 1000 |
| Motor | 15->18 88kW |
| Standaard vermogen | 120 CV / 88 kW |
| Cilinderinhoud | 1000 cc |
| Brandstof | Benzina aspirato |
| Voertuigtype | Moto |
ECU
Beschikbare tuning-opties:
- Base timing - full power
- Base timing - low power
- Base timing - clutch/neutral
- Load / throttle position reference
- Exhaust valve management in deceleration - gear based - full power
- Exhaust valve management in deceleration - gear based - low power
- Exhaust valve management - gear based - full power
- Exhaust valve management - gear based - low power
- Engine idle vs. ECT sensor
- Injection for IAP - full power
- Injection for IAP - low power
- Injection for TPS - full power
- Injection for TPS - low power
- RPM Limiter
- RPM Limiter 2
- Ram Air
- Secondary throttle plates management in deceleration - gear based - full power
- Secondary throttle plates management in deceleration - gear based - low power
- Secondary throttle plates management - gear based - full power
- Secondary throttle plates management - gear based - low power
- Cooling fan activation
- Traction control - activation sensitivity
- Traction control - slip sensitivity
- Traction control - TPS correction
Firmware-identificatoren (2)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|
| 21175-0754 | CPA8KPB1 |
1.00.006 | — |
DENSO 21175-02XX/03XX/07XX/08XX/09XX |
| 21175-1218 | KPHJK9E0 |
1.00.009 | 49245-1113 |
DENSO 21175-1212/1213/1217/1218 |
Technische voertuignotities
OBD located under the passenger rear seat
ECU located in the engine bay behind/close to the battery. Difficulty: easy
ECU-notities
Microprocessor SH7058 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Microprocessor M32R196 To work on this ECU you can use NewTrasdata
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven
