KAESSBOHRER PISTENBULLY 200 7.2L 240kW/322HP TEMIC

ECU TEMIC TEMIC PLD · 326 CV (24 kW) · 7200 cc · Diesel sovralimentato

ECU-databaseKAESSBOHRER › KAESSBOHRER PISTENBULLY 200 7.2L 240kW/322HP TEMIC

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 2 firmwareversies

Voertuiggegevens

MerkKAESSBOHRER
ModelPISTENBULLY
Motor200 7.2L 240kW/322HP TEMIC
Standaard vermogen326 CV / 24 kW
Cilinderinhoud7200 cc
BrandstofDiesel sovralimentato
VoertuigtypeOhv

ECU

FabrikantTEMIC
ModelTEMIC PLD
Geheugen / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Beschikbare tuning-opties:

  • Max threshold air mass flow throught compressor
  • Boost pressure limiter
  • Protection for engine overheating
  • Protection for engine overheating 2
  • Protection for engine overheating 3
  • Basic torque management at engine cranking
  • Engine idle vs. ECT sensor
  • Injection angle
  • Injection angle 2
  • Injection angle - correction
  • Injection delivery angle
  • Smoke limiter
  • Maximum indicated torque
  • Max torque profile

Firmware-identificatoren (2)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
56E 1.00.007 TEMIC TEMIC PLD
60A 1.00.005 TEMIC TEMIC PLD

ECU-notities

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This setting file is enabled for the GENIUS serial tuning; it is required the specific TEMIC connection cable.Please read the specific handbook in order to open the ECU and to solder the wire inside it.