IVECO TECTOR 160 4.5L 4L 118kW/158HP EDC7UC31
ECU BOSCH EDC7UC31 · 160 CV (118 kW) · 4500 cc · Diesel sovralimentato
ECU-database ›
IVECO › IVECO TECTOR 160 4.5L 4L 118kW/158HP EDC7UC31
Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
7 firmwareversies
Verkrijg het bestand voor dit voertuig
Voertuiggegevens
| Merk | IVECO |
| Model | TECTOR |
| Motor | 160 4.5L 4L 118kW/158HP EDC7UC31 |
| Standaard vermogen | 160 CV / 118 kW |
| Cilinderinhoud | 4500 cc |
| Brandstof | Diesel sovralimentato |
| Voertuigtype | Tir |
ECU
| Fabrikant | BOSCH |
| Model | EDC7UC31 |
| Geheugen / EPROM | M58BW016DB PQFP80 - Flash 3_V 512 x 32 |
Beschikbare tuning-opties:
- Boost pressure limiter
- Boost pressure limiter 2
- Boost pressure
- Boost pressure 2
- Boost pressure F (temperature)
- Desired fuel quantity map for open loop
- EGR valve control
- Exhaust gas temperature
- Max CAT temperature threshold for component protection
- Basic torque management at engine cranking
- Gearbox maximum torque allowed
- Injection period
- Injection opening time related to inj. pressure
- Injection mass at high temperature
- Injection mass at low temperature
- Maximum fuel quantity for turbine overspeed prevention
- Injection limit - turbocharger protection
- Max injection limit
- Max injection limit 2
- Max injection limit - limp mode
- L
- Torque limiter
- Torque limiter during particulate filter overloading - pressure
- Lambda value of the smoke limitation
- MAP - limp home mode
- Maximum indicated torque
- Max torque profile
- Injection quantity for engine overheating protection
- Protection for fuel overheating
- Specific injection pressure limiter
- Specific injection pressure limiter for diagnostics
- Specific injection pressure
- Specific injection pressure 2
- Specific injection pressure in aftertreatment modes
- Driver torque request
- Torque limiter for selected gear
- Torque limiter in recovery mode
- Torque model - torque to fuel quantity conversion
- Torque model for performance limiter
- Torque model with performance limiter stage 1 is active
- Torque model with performance limiter stage 2 active
- Torque model with performance limiter after coldstart 1 active
- Turbocharger volumetric efficiency
Firmware-identificatoren (7)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|---|---|---|---|
| — | — | 1.67.008 | P340VA0 fbylbq01_ef4 | BOSCH EDC7UC31 |
| — | — | 1.67.010 | P340V91 fbylbn03.ec7 | BOSCH EDC7UC31 |
| — | — | 1.67.019 | P340VA0 fbylbq01_ef2 | BOSCH EDC7UC31 |
| — | — | 1.67.011 | P340V91 fbylbn02.ec6 | BOSCH EDC7UC31 |
| — | — | 1.67.012 | P340VA0 fbylbq01_an2 | BOSCH EDC7UC31 |
| — | — | 1.67.009 | P340VA0 fbylbq01_ef4 | BOSCH EDC7UC31 |
| — | — | 1.67.010 | P340VA02 fbylbq01_ef2 | BOSCH EDC7UC31 |
ECU-notities
To work on this ECU you can use NewTrasdata This Setting File can be used for serial programming system NewGenius.
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven
Andere IVECO
EUROTECH
E30 9.5L 224kW/300 HP EDC M7 EUROTECH
E38 9.5L 279kW/380HP EDC M7 EUROTECH
E47 14.8L 345kW/470HP EDC M7 EUROSTAR
E47 14.8L 345kW/470HP EDC M7 DAILY MY 2000
2.5L TDI 74kW/99HP EDC1.35 EUROSTAR
E38 9.5L 279kW/380HP EDC M7 DAILY MY 2000
2.8L 92kW/123HP MS6.3 CURSOR 10
440 10.3L 312kW/430HP MS6.2 DAILY MY 2000
2.8L 96kW/129HP MS6.3 CURSOR 13
460 12.9L 338kW/460HP MS6.2
E30 9.5L 224kW/300 HP EDC M7 EUROTECH
E38 9.5L 279kW/380HP EDC M7 EUROTECH
E47 14.8L 345kW/470HP EDC M7 EUROSTAR
E47 14.8L 345kW/470HP EDC M7 DAILY MY 2000
2.5L TDI 74kW/99HP EDC1.35 EUROSTAR
E38 9.5L 279kW/380HP EDC M7 DAILY MY 2000
2.8L 92kW/123HP MS6.3 CURSOR 10
440 10.3L 312kW/430HP MS6.2 DAILY MY 2000
2.8L 96kW/129HP MS6.3 CURSOR 13
460 12.9L 338kW/460HP MS6.2