HYUNDAI SANTA FE MK3 2.4L 16V MPI 140kW/188HP SIM2K-141/341

ECU CONTINENTAL-SIEMENS-VDO SIM2K-141/341 · 190 CV (14 kW) · 2400 cc · Benzina aspirato

ECU-databaseHYUNDAI › HYUNDAI SANTA FE MK3 2.4L 16V MPI 140kW/188HP SIM2K-141/341

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 2 firmwareversies

Voertuiggegevens

MerkHYUNDAI
ModelSANTA FE MK3
Motor2.4L 16V MPI 140kW/188HP SIM2K-141/341
Standaard vermogen190 CV / 14 kW
Cilinderinhoud2400 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantCONTINENTAL-SIEMENS-VDO
ModelSIM2K-141/341
Geheugen / EPROMAm29BDD160G PQFP80 - Flash 3_V 512 x 32

Beschikbare tuning-opties:

  • Advance at idle speed
  • Optimal spark timing/MBT
  • Requested spark advance - high octane
  • Requested spark advance - low octane
  • Desired engine load calculation
  • Lambda correction
  • Lambda Correction 2
  • Exhaust gas temperature
  • Factor to correct fuel delivery system
  • Engine idle in Drive position
  • Engine idle
  • Engine idle in Park position
  • Lambda enrichment for components protection
  • RPM Limiter
  • RPM limiter - fuel cut
  • RPM limiter - N
  • Lambda reference
  • Knock detection factor
  • Speed limiter
  • MAF sensor calibration
  • Optimal engine moment
  • Air mass flow
  • Driver torque request
  • Driver torque request - AT
  • Driver torque request for reverse gear
  • Variable valve timing - inlet
  • Variable valve timing - outlet

Firmware-identificatoren (2)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
5WY5F99DCA692L00.DAT 1.11.005 CONTINENTAL-SIEMENS-VDO SIM2K-141/341
5WY5M71CCA691T10.DAT 1.11.014 CONTINENTAL-SIEMENS-VDO SIM2K-141/341

Technische voertuignotities

OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.

ECU-notities

EPROM AM29BDD160G / S29CD016G PQFQ 80 Pin - Microprocessor MPC 561/2 To work on this ECU you can use NewTrasdata