Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
✓ Aanvullende module beschikbaar 2 firmwareversies
Voertuiggegevens
| Merk | HYUNDAI |
| Model | i20 MK3 (BC3/BI3) |
| Motor | 1.0L T-GDi 48V 74kW/99HP CPEGD3.20.1 |
| Standaard vermogen | 101 CV / 74 kW |
| Cilinderinhoud | 1000 cc |
| Brandstof | Benzina mild hybrid - MHEV |
| Voertuigtype | Auto |
ECU
| Fabrikant | KEFICO |
| Model | CPEGD3.20.1 |
| Geheugen / EPROM | Micro Infineon TRICORE categoria AURIX. Il micro ha una DFLASH da 384Kbyte |
Beschikbare tuning-opties:
- Absolute boost limit
- Spark advance correction for EGT sensor
- Base timing
- Minimum advance allowed
- Optimal spark timing/MBT
- Boost pressure limiter for diagnostics
- Boost pressure limiter
- Boost pressure
- Desired engine load calculation
- Exhaust gas temperature
- Exhaust gas temperature threshold for component protection
- Factor to correct fuel delivery system
- Engine idle in Drive position
- Engine idle in Drive position (Sport)
- Engine idle vs. ECT sensor
- Injection cut in deceleration
- Rpm threshold fuel cut
- Torque limiter
- Torque limiter for diagnostic
- Lambda enrichment for components protection
- Lambda correction for exhaust manifold temperature
- Lambda efficiency
- RPM Limiter
- RPM limiter in Park position
- Lambda driver wish
- Knock detection factor
- Speed limiter
- Cruise control speed limiter
- Cruise control speed limiter 2
- Maximum indicated torque
- Lookup table minimum defined efficiency
- Throttle air mass flow calculation
- Max torque profile
- Optimal engine moment
- Specific injection pressure
- Specific injection pressure 2
- Driver torque request
- Driver torque request 2
- Driver torque request 3
- Driver torque request for reverse gear
- Torque limiter for the 1st gear selected
- Torque limiter for the 2nd gear selected
- Torque limiter for the 3rd gear selected
- Torque limiter for the 4th gear selected
- Torque limiter for the 5th gear selected
- Torque limiter for the 6th gear selected
- Torque limiter for the 7th gear selected
- Torque limiter for the 8th gear selected
- Torque limiter for for reverse gear
- Throttle angle management
- Turbocharger volumetric efficiency
- Variable valve timing - inlet
- Variable valve timing - outlet
Firmware-identificatoren (2)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|
| 3910607079 | TBC-0LD00F20060K |
1.94.010 | — |
KEFICO CPEGD3.20.1 |
| 3910607194 | VBC-0LD00F10060I |
1.94.012 | — |
KEFICO CPEGD3.20.1 |
Technische voertuignotities
OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.
ECU-notities
This Setting File can be used for serial system NewGenius.
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven
