Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
✓ Aanvullende module beschikbaar 13 firmwareversies
Voertuiggegevens
| Merk | HYUNDAI |
| Model | GETZ |
| Motor | 1.5L CRDi 81kW/109HP EDC16C39 |
| Standaard vermogen | 110 CV / 81 kW |
| Cilinderinhoud | 1500 cc |
| Brandstof | Diesel sovralimentato |
| Voertuigtype | Auto |
ECU
| Fabrikant | BOSCH |
| Model | EDC16C39 |
| Geheugen / EPROM | M58BW016DB PQFP80 - Flash 3_V 512 x 32 |
Beschikbare tuning-opties:
- Boost pressure limiter
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- Boost pressure in aftertreatment modes
- EGR valve control
- EGR valve control 2
- Exhaust gas temperature
- Protection for engine overheating
- Basic torque management at engine cranking
- Engine idle vs. ECT sensor
- Injection period
- Injection opening time related to inj. pressure
- Max injection limit
- Max injection limit - limp mode
- Initialization values over pressure control valve
- J
- Torque limiter 2
- Boost pressure deviation limits for basic charge air pressure
- Boost pressure deviation limits for basic charge air pressure 2
- Torque limiter
- Torque limiter during particulate filter overloading - pressure
- Lambda value of the smoke limitation
- Minimum LSU sensor temperature limit - heater control
- Minimum LSU sensor temperature for O2
- Maximum LSU sensor temperature limit - heater control
- Maximum LSU sensor temperature for O2
- LSU temperature threshold PID heater governor activation
- Maximum indicated torque
- Injection quantity for engine overheating protection
- Injection quantity for engine overheating protection 3
- Protection for fuel overheating
- Protection for fuel overheating 2
- Protection for oil overheating
- Pressure control map over pressure regulating valve
- Specific injection pressure limiter
- Specific injection pressure limiter 2
- Specific injection pressure
- Driver torque request
- Torque limiter for the 1st gear selected
- Torque limiter for the 2nd gear selected
- Torque limiter for the 3rd gear selected
- Torque limiter for the 4th gear selected
- Torque limiter for the 5th gear selected
- Torque limiter for the 6th gear selected
- Torque limiter for for reverse gear
- Torque limiter in recovery mode
- Torque limiter in recovery mode 2
- Volumetric efficiency
- Volumetric efficiency - correction
- Turbocharger volumetric efficiency
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit 2
Firmware-identificatoren (13)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|
| — | 1037377907 |
1.67.003 | P373602I |
BOSCH EDC16C39 |
| — | 1037394287 |
1.67.012 | P373C00I |
BOSCH EDC16C39 |
| — | 1037383171 |
1.67.012 | P373A10I |
BOSCH EDC16C39 |
| — | 1037380474 |
1.67.025 | P373701I |
BOSCH EDC16C39 |
| — | 1037377909 |
1.67.019 | P373602I |
BOSCH EDC16C39 |
| — | 1037383173 |
1.67.016 | P373A10I |
BOSCH EDC16C39 |
| — | 1037383151 |
1.67.004 | P373A10I |
BOSCH EDC16C39 |
| — | 1037383176 |
1.67.005 | P373A10N |
BOSCH EDC16C39 |
| — | 1037380472 |
1.67.013 | P373701I |
BOSCH EDC16C39 |
| — | 1037380861 |
1.67.006 | P373701I |
BOSCH EDC16C39 |
| — | 1037379606 |
1.67.012 | P373602I |
BOSCH EDC16C39 |
| — | 1037394295 |
1.67.015 | P373C00I |
BOSCH EDC16C39 |
| — | 1037383175 |
1.67.017 | P373A10I |
BOSCH EDC16C39 |
Technische voertuignotities
OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.
ECU-notities
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial programming system NewGenius. To work on this ECU you can use NewTrasdata
Aanvullende modules beschikbaar
A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven
