GOES TERROX 500L EPS 24->25 24kW

ECU BOSCH MSE6.0 · 33 CV (24 kW) · 495 cc · Benzina aspirato

ECU-databaseGOES › GOES TERROX 500L EPS 24->25 24kW

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 1 firmwareversies

Voertuiggegevens

MerkGOES
ModelTERROX 500L EPS
Motor24->25 24kW
Standaard vermogen33 CV / 24 kW
Cilinderinhoud495 cc
BrandstofBenzina aspirato
VoertuigtypeMoto

ECU

FabrikantBOSCH
ModelMSE6.0
Geheugen / EPROMMicro BGA ST SPC563M64 - 12288 Kbit - 180000

Beschikbare tuning-opties:

  • Base timing
  • Lambda/AFR full load/WOT
  • Lambda/AFR mixture at part load
  • Lambda/AFR mixture for engine temperature at crancking
  • Spark advance correction for ECT sensor
  • Desired engine load calculation
  • Exhaust gas temperature
  • Factor to correct fuel delivery system
  • Weighting map cold-start
  • Weighting map cold-start 2
  • Engine idle vs. ECT sensor
  • Engine idle vs. EOT sensor
  • Injection correction for ECT sensor
  • Injection correction for ECT sensor 2
  • Lambda enrichment for components protection
  • RPM Limiter
  • Speed limiter
  • MAP - limp home mode
  • Throttle air mass flow calculation
  • Throttle angle limitation
  • Throttle angle management
  • Volumetric efficiency

Firmware-identificatoren (1)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
F01R0AD071 1.88.012F01RB0DKAI BOSCH MSE6.0

ECU-notities

Microprocessor SPC563M64 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata