GMC SAVANA 6.6L V8 DURAMAX 194kW/260HP DELCO E86A

ECU DELCO E86A · 264 CV (194 kW) · 6600 cc · Diesel sovralimentato

ECU-databaseGMC › GMC SAVANA 6.6L V8 DURAMAX 194kW/260HP DELCO E86A

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 9 firmwareversies

Voertuiggegevens

MerkGMC
ModelSAVANA
Motor6.6L V8 DURAMAX 194kW/260HP DELCO E86A
Standaard vermogen264 CV / 194 kW
Cilinderinhoud6600 cc
BrandstofDiesel sovralimentato
VoertuigtypeLCV

ECU

FabrikantDELCO
ModelE86A
Geheugen / EPROMMICRO ST TRICORE - 16384 Kbit - 200000

Beschikbare tuning-opties:

  • Boost pressure limiter
  • Boost pressure
  • Injection at part load
  • Injection at full throttle
  • Injection 1
  • Torque limiter 2
  • Torque limiter 3
  • Torque limiter 4
  • Torque limiter 5
  • Torque limiter
  • RPM Limiter
  • RPM Limiter 2
  • RPM limiter 3
  • Speed limiter
  • Specific injection pressure
  • Specific injection pressure 2
  • Specific injection pressure 3
  • Air mass flow
  • Driver torque request

Firmware-identificatoren (9)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
1264575212645751_12655122_12645750 1.94.00746624_50234_46614_56500_56497 DELCO E86A
1264575212645751_12659092_12645750 1.94.00346624_50234_46614_56499_58774 DELCO E86A
1264625112646250_12646252_12646249 1.94.01046274_46273_46267_51822_51810 DELCO E86A
1264625146276_46272_46269_51829_51810 1.94.00746277_46272_46267_51822_51810 DELCO E86A
1264625112646250_12646252_12646249 1.94.00946416_46411_46267_51814_51810 DELCO E86A
1264625112646250_12646252_12646249 1.94.00746276_46272_46268_78546_78537 DELCO E86A
1264625112646250_12646252_12646249 1.94.00946277_46272_46267_51822_51810 DELCO E86A
1264933112649245_12649653_12649244 1.94.00749692_49688_49677_51052_51051 DELCO E86A
1264933112649245_12680289_12649244 1.94.00449691_49689_49679_78557_78551 DELCO E86A

ECU-notities

MICRO Infineon Tricore TC1796 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata