Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
✓ Aanvullende module beschikbaar 14 firmwareversies
Voertuiggegevens
| Merk | FIAT |
| Model | TALENTO |
| Motor | 1.6L 16V MJET 89KW/119HP EDC17C84 |
| Standaard vermogen | 121 CV / 89 kW |
| Cilinderinhoud | 1600 cc |
| Brandstof | Diesel sovralimentato |
| Voertuigtype | LCV |
ECU
| Fabrikant | BOSCH |
| Model | EDC17C84 |
| Geheugen / EPROM | MICRO ST TRICORE - 20480 Kbit - 280000 |
Beschikbare tuning-opties:
- Boost pressure limiter
- Boost pressure limiter 2
- Boost pressure
- Boost pressure in aftertreatment modes
- Maximum torque limitation at clutch
- Effective engine torque setpoint for safety
- Max accepted exhaust gas temperature value after turbine
- Exhaust gas temperature value before turbine in regeneration mode
- Exhaust gas temperature value before turbine in regular injection mode
- Max accepted exhaust gas temperature value at particulate sensor
- Max torque correction factor for IAT sensor
- Max torque correction factor for IAT sensor 2
- Max torque correction factor for IAT sensor in aftertreatment modes
- Max torque correction factor for IAT sensor in aftertreatment modes 2
- Basic torque management at engine cranking
- Basic torque management at engine cranking 2
- Basic torque management at engine cranking 3
- Engine idle vs. ECT sensor
- Gearbox maximum torque allowed
- Injection period
- Injection opening time related to inj. pressure
- Injection period in aftertreatment modes 3
- Torque limiter
- Torque limiter for diagnostic
- Maximum absolute effective torque in ECO mode
- Maximum indicated torque
- Maximum indicated torque in regeneration mode
- Maximum indicated torque - safety condition
- Maximum indicated torque - safety condition 2
- Max exhaust gas temperature value before turbine in regeneration mode
- Max exhaust gas temperature value before turbine in regular injection mode
- Turbine temperature maximum value
- Specific injection pressure limiter
- Specific injection pressure limiter 4
- Specific injection pressure limiter in aftertreatment modes
- Specific injection pressure limiter for diagnostics
- Maximum pressure ratio limit depending on temperature
- Specific injection pressure
- Specific injection pressure in aftertreatment modes
- Specific injection pressure in aftertreatment modes 2
- Driver torque request
- Driver torque request Sport mode
- Maximum temperature before turbine for diagnosis
- Temperature before turbine setpoint during npu, spu and injection mode
- Torque limiter for EFT sensor
- Torque limiter in recovery mode
- Torque limiter in recovery mode 2
- Torque limiter in recovery mode 3
- Torque model - fuel quantity to torque conversion
- Torque model - fuel quantity to torque conversion 2
- Torque model - fuel quantity to torque conversion in aftertreatment modes
- Torque model - torque to fuel quantity conversion
Firmware-identificatoren (14)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|
| — | 10SW043020 |
1.94.015 | 10SW043733 |
BOSCH EDC17C84 |
| — | 10SW014336 |
1.94.018 | 10SW032137 |
BOSCH EDC17C84 |
| — | 10SW099714 |
1.94.017 | 10SW099714 |
BOSCH EDC17C84 |
| — | 10SW011004 |
1.94.014 | 10SW011004 |
BOSCH EDC17C84 |
| — | 10SW014336 |
1.94.007 | 10SW032685 |
BOSCH EDC17C84 |
| — | 10SW082608 |
1.94.012 | 10SW082608 |
BOSCH EDC17C84 |
| — | 10SW014336 |
1.94.033 | 10SW027438 |
BOSCH EDC17C84 |
| — | 10SW075638 |
1.94.009 | 10SW075638 |
BOSCH EDC17C84 |
| — | 10SW043020 |
1.94.021 | 10SW043733 |
BOSCH EDC17C84 |
| — | 10SW008509 |
1.94.028 | 10SW011004 |
BOSCH EDC17C84 |
| — | 10SW048719 |
1.94.023 | 10SW048719 |
BOSCH EDC17C84 |
| — | 10SW099436 |
1.94.010 | 10SW099436 |
BOSCH EDC17C84 |
| — | 10SW014336 |
1.94.016 | 10SW027438 |
BOSCH EDC17C84 |
| — | 10SW014336 |
1.94.014 | 10SW032137 |
BOSCH EDC17C84 |
Technische voertuignotities
OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.
ECU-notities
Microprocessor TC1782 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Aanvullende modules beschikbaar
A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven
