FIAT STILO 2.4L 20V ABARTH 125kW/168HP ME3.1

ECU BOSCH ME3.1 / ME7.3H4 · 170 CV (125 kW) · 2400 cc · Benzina aspirato

ECU-databaseFIAT › FIAT STILO 2.4L 20V ABARTH 125kW/168HP ME3.1

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 6 firmwareversies

Voertuiggegevens

MerkFIAT
ModelSTILO
Motor2.4L 20V ABARTH 125kW/168HP ME3.1
Standaard vermogen170 CV / 125 kW
Cilinderinhoud2400 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelME3.1 / ME7.3H4
Geheugen / EPROMHYBRID ECU - 4.096Kbit 0x80000

Beschikbare tuning-opties:

  • Advance at idle speed
  • Advance at part load
  • Advance full load
  • Injection at part load
  • Injection at full throttle
  • Speed limiter

Firmware-identificatoren (6)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02612066551037363857 1.44.006 BOSCH ME3.1 / ME7.3H4
02612066551277356595 1.44.008 BOSCH ME3.1 / ME7.3H4
02612066551277356574 1.44.003 BOSCH ME3.1 / ME7.3H4
02612076051037363858 1.44.014 BOSCH ME3.1 / ME7.3H4
02612082431037368127 1.44.001 BOSCH ME3.1 / ME7.3H4
02612082431277358127 1.44.008 BOSCH ME3.1 / ME7.3H4

Technische voertuignotities

OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.

ECU-notities

HYBRID ECU! To modify this ECU you need our serial protocol FLASH_0018. Please read the manual handbook to connect the specific cable. This Setting File can be used for serial system : Genius or NewGenius.

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop