Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
✓ Aanvullende module beschikbaar 5 firmwareversies
Voertuiggegevens
| Merk | FIAT |
| Model | SCUDO II |
| Motor | 2.0L 16V MJET 94kW/126HP DCM3.5 |
| Standaard vermogen | 128 CV / 94 kW |
| Cilinderinhoud | 2000 cc |
| Brandstof | Diesel sovralimentato |
| Voertuigtype | LCV |
ECU
| Fabrikant | DELPHI |
| Model | DCM3.5 |
| Geheugen / EPROM | MICRO BGA MOTOROLA FREESCALE con FLASH interna MPC5566 24576 Kbit - 0x300000 |
Beschikbare tuning-opties:
- Boost pressure limiter
- Boost pressure
- EGR valve control
- Injection opening time related to inj. pressure
- Torque limiter 2
- Torque limiter 3
- Torque limiter 4
- Torque limiter
- Torque limiter for smoke limitation
- Specific injection pressure limiter
- Specific injection pressure limiter for EFT sensor
- Specific injection pressure
- Specific injection pressure 2
- Air mass flow
- Driver torque request
- Driver torque request for high speed
- Driver torque request for low speed
- Driver torque request at the start
- Driver torque request for reverse gear
- Torque limiter for EFT sensor
- Torque limit table for ECT sensor
- Torque model - fuel quantity to torque conversion
- Torque model - torque to fuel quantity conversion
- Variable geometry duty cycle limit
Firmware-identificatoren (5)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|
| 9666912580 | 9666912580 |
1.00.021 | 9691878980 |
DELPHI DCM3.5 |
| 9666912580 | 9666912580 |
1.81.002 | 9691719180 |
DELPHI DCM3.5 |
| 9666912580 | 9666912580 |
1.81.011 | 9691719780 |
DELPHI DCM3.5 |
| 9666912580 | 9666912580 |
1.81.030 | 9678962480 |
DELPHI DCM3.5 |
| 9666912580 | 9666912580 |
1.81.018 | 9679164680 |
DELPHI DCM3.5 |
Technische voertuignotities
ECU located in the engine bay on the driver'side. Difficulty: easy.
OBD located under the steering column, to the right of the pedalboard, accessible without removing anything.
ECU-notities
Microprocessor FMPC 5566 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven
