FIAT PUNTO GRANDE (199) 1.4L 8V NATURAL POWER 57kW/77HP IAW5SF3

ECU MARELLI 5SF3.M1 HW300 · 78 CV (57 kW) · 1400 cc · Benzina aspirato

ECU-databaseFIAT › FIAT PUNTO GRANDE (199) 1.4L 8V NATURAL POWER 57kW/77HP IAW5SF3

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 6 firmwareversies

Voertuiggegevens

MerkFIAT
ModelPUNTO GRANDE (199)
Motor1.4L 8V NATURAL POWER 57kW/77HP IAW5SF3
Standaard vermogen78 CV / 57 kW
Cilinderinhoud1400 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantMARELLI
Model5SF3.M1 HW300
Geheugen / EPROMMicro ST - 4096 Kbit

Beschikbare tuning-opties:

  • Advance at idle speed
  • Advance at part load
  • Advance full load
  • Injection at part load
  • RPM Limiter
  • Specific air mass charge 2
  • Air mass flow
  • Driver torque request

Firmware-identificatoren (6)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
IAW5SFHW3000813H45 1.00.013 MARELLI 5SF3.M1 HW300
IAW5SFHW3000904F40E 1.00.003 MARELLI 5SF3.M1 HW300
IAW5SFHW3000905F41 1.00.007 MARELLI 5SF3.M2 HW300
IAW5SFHW3002103F55 1.00.020 MARELLI 5SF3.M2 HW300
IAW5SFHW4136035MCF 1.00.003 MARELLI 5SF8.MR
IAW5SFHW4136035MCL 1.00.009 MARELLI 5SF8.MR

Technische voertuignotities

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU-notities

Microprocessor ST10F280. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata
Microprocessor ST10F296 This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop