FIAT MULTIPLA 1.9L 8V JTD 77kW/103HP EDC15C7

ECU BOSCH EDC15C5 · 105 CV (77 kW) · 1900 cc · Diesel sovralimentato

ECU-databaseFIAT › FIAT MULTIPLA 1.9L 8V JTD 77kW/103HP EDC15C7

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 3 firmwareversies

Voertuiggegevens

MerkFIAT
ModelMULTIPLA
Motor1.9L 8V JTD 77kW/103HP EDC15C7
Standaard vermogen105 CV / 77 kW
Cilinderinhoud1900 cc
BrandstofDiesel sovralimentato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelEDC15C5
Geheugen / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Beschikbare tuning-opties:

  • Main injection start angle
  • EGR valve control
  • Injection at part load
  • Injection at full throttle
  • Torque limiter
  • Smoke limiter
  • Specific injection pressure limiter
  • Specific injection pressure
  • Air mass flow

Firmware-identificatoren (3)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02810018791037356776 1.02.005 BOSCH EDC15C5
02810018791037350158 1.02.017 BOSCH EDC15C5
02810018791037359735 1.02.013 BOSCH EDC15C5

Technische voertuignotities

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU-notities

Original EPROM PSOP 44 pins 29F400BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This Setting File can be used for serial programming system NewGenius.

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop