FIAT DOBLO Mk1 1.2L 8V 48kW/65HP IAW59F

ECU MARELLI 59F.M3 HW003 · 65 CV (48 kW) · 1200 cc · Benzina aspirato

ECU-databaseFIAT › FIAT DOBLO Mk1 1.2L 8V 48kW/65HP IAW59F

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 6 firmwareversies

Voertuiggegevens

MerkFIAT
ModelDOBLO Mk1
Motor1.2L 8V 48kW/65HP IAW59F
Standaard vermogen65 CV / 48 kW
Cilinderinhoud1200 cc
BrandstofBenzina aspirato
VoertuigtypeLCV

ECU

FabrikantMARELLI
Model59F.M3 HW003
Geheugen / EPROMHYBRID ECU - 2.048Kbit - 0x40000

Beschikbare tuning-opties:

  • Advance at part load
  • Advance full load
  • Injection at part load
  • RPM Limiter

Firmware-identificatoren (6)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
IAW59FHW003 59FSC3502M50 1.01.004 MARELLI 59F.M3 HW003
IAW59FHW023 59FSC3900D89 1.01.002 MARELLI 59F.M3 HW003
IAW59FHW303 59FSC18120D2 1.00.004 MARELLI 59F.M3 HW103
IAW59FHW303 59FSC18080D1 1.00.005 MARELLI 59F.SC HW303
IAW5AFHW303 5AFDT19BBT95 1.00.004 MARELLI 5AF.P4 HW303
IAW59FHW603 59FSC40120D2 1.00.002 MARELLI 5AF.PE HW603

Technische voertuignotities

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU-notities

HYBRID ECU! To modify this ECU you need our serial protocol FLASH_0034. This Setting File can be used for serial programming system NewGenius. In the ADVANCE maps, each 10 numbers is about 1 degree.

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop