FIAT BRAVO Mk2 1.4L 16V TJET 88kW/118HP ME7.9.10

ECU BOSCH ME7.9.10 · 120 CV (88 kW) · 1400 cc · Benzina sovralimentato

ECU-databaseFIAT › FIAT BRAVO Mk2 1.4L 16V TJET 88kW/118HP ME7.9.10

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 9 firmwareversies

Voertuiggegevens

MerkFIAT
ModelBRAVO Mk2
Motor1.4L 16V TJET 88kW/118HP ME7.9.10
Standaard vermogen120 CV / 88 kW
Cilinderinhoud1400 cc
BrandstofBenzina sovralimentato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelME7.9.10
Geheugen / EPROMMICRO ST - 6656 Kbit

Beschikbare tuning-opties:

  • Optimal spark timing/MBT
  • Spark advance correction for ECT sensor
  • Advance correction
  • Boost pressure limiter
  • Boost pressure limiter 2
  • Boost pressure
  • Desired engine load calculation
  • Exhaust gas temperature
  • Factor to correct fuel delivery system
  • Advance limiter
  • Lambda enrichment for components protection
  • RPM Limiter
  • RPM limit for ECT sensor
  • RPM limit for EOT sensor
  • Lambda driver wish
  • Knock detection factor
  • Speed limiter
  • Throttle air mass flow calculation
  • Max torque profile
  • Optimal engine moment
  • Driver torque request
  • Driver torque request for reverse gear
  • Driver torque request Sport mode
  • Throttle angle management
  • Overboost timing

Firmware-identificatoren (9)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
1.91.012 BOSCH ME7.9.10
02612016871037392100 1.91.018 BOSCH ME7.9.10
02612016881037396771 1.91.024 BOSCH ME7.9.10
02612016881037396660 1.91.006 BOSCH ME7.9.10
02612016881037391128 1.91.020 BOSCH ME7.9.10
0261S043691037399276 1.91.003 BOSCH ME7.9.10
0261S057141037502931 1.91.004 BOSCH ME7.9.10
0261S058721037500840 1.91.016 BOSCH ME7.9.10
0261S064591037510429 1.91.016 BOSCH ME7.9.10

Technische voertuignotities

OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.

ECU-notities

Microprocessor ST10F275 This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop