Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
✓ Aanvullende module beschikbaar 8 firmwareversies
Voertuiggegevens
| Merk | FIAT |
| Model | 500 (312) |
| Motor | 1.3L 16V MJET 70kW/94HP MJD9DF |
| Standaard vermogen | 95 CV / 7 kW |
| Cilinderinhoud | 1300 cc |
| Brandstof | Diesel sovralimentato |
| Voertuigtype | Auto |
ECU
| Fabrikant | MARELLI |
| Model | MJD9DF |
| Geheugen / EPROM | MICRO BGA FREESCALE MPC5644A - 32768 Kbit - 400000 |
Beschikbare tuning-opties:
- Boost pressure limiter
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- Boost pressure 2
- Boost pressure 3
- Boost pressure 4
- EGR valve control
- EGR valve control 2
- EGR valve control 3
- EGR valve control 4
- EGR valve control 5
- EGR valve control 6
- EGR valve control 7
- Max accepted exhaust gas temperature value after turbine
- Negative error threshold for control fault map
- Error pressure threshold - turbocharger reference negative transient value
- Positive error threshold for control fault map
- Error pressure threshold - turbocharger reference positive transient value
- Gearbox maximum torque allowed
- Injection period
- IF1
- Injection period 3
- Injection period 4
- Injection period 5
- Injection period 6
- Injection period 7
- Injection period 8
- Injection period 9
- Injection opening time related to inj. pressure
- Injection for ECT sensor
- Max injection limit
- Maximum injection quantity
- Lambda minimum value for components protection
- Lambda value of the smoke limitation
- Lambda value of the smoke limitation 2
- Lambda value of the smoke limitation 4
- Maximum indicated torque
- Maximum indicated torque - offroad
- Maximum indicated torque - sport
- Max torque profile
- Specific injection pressure limiter
- Specific injection pressure limiter for diagnostics
- Specific injection pressure limiter for EFT sensor
- Specific injection pressure
- Specific injection pressure 2
- Specific injection pressure 3
- Specific injection pressure 4
- Driver torque request
- Driver torque request - AT
- Torque limit table for IAT sensor
- Torque limiter for EFT sensor
- Torque limiter in recovery mode 2
- Torque limit table for ECT sensor
- Torque limit table for ECT sensor at engine cranking
- Torque limit table for ECT sensor - offroad
- Torque limit table for ECT sensor - sport
- Torque model - maximum torque to fuel quantity conversion
- Torque model - torque to fuel quantity conversion
- Take-off torque law in Normal mode - AT
- Take-off torque law in Offroad mode - AT - 2
- Take-off torque law for reverse gear - AT
- Take-off torque law for reverse gear - AT - 2
- Take-off torque law in Sport mode - AT - 2
- Take-off torque law in Normal mode
Firmware-identificatoren (8)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|
| MJ9DFHW000 | 4E43B122 |
2.00.015 | — |
MARELLI MJD9DF |
| MJ9DFHW000 | 4E43X122 |
2.00.007 | — |
MARELLI MJD9DF |
| MJ9DFHW000 | 4B45B110 |
2.01.011 | — |
MARELLI MJD9DF |
| MJ9DFHW000 | 4E45B220 |
2.01.012 | — |
MARELLI MJD9DF |
| MJ9DFHW000 | 4F42B228 |
2.00.011 | — |
MARELLI MJD9DF |
| MJ9DFHW000 | 4F42B226 |
2.00.017 | — |
MARELLI MJD9DF |
| MJ9DFHW000 | 4F42B230 |
2.00.013 | — |
MARELLI MJD9DF |
| MJ9DFHW000 | 4F42B222 |
2.00.023 | — |
MARELLI MJD9DF |
Technische voertuignotities
OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.
ECU-notities
Microprocessor BGA MPC5644A This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Aanvullende modules beschikbaar
A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven
