DUCATI MONSTER 937 21->24 82kW

ECU BOSCH ME17.9.21 · 111 CV (82 kW) · 937 cc · Benzina aspirato

ECU-databaseDUCATI › DUCATI MONSTER 937 21->24 82kW

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 11 firmwareversies

Voertuiggegevens

MerkDUCATI
ModelMONSTER 937
Motor21->24 82kW
Standaard vermogen111 CV / 82 kW
Cilinderinhoud937 cc
BrandstofBenzina aspirato
VoertuigtypeMoto

ECU

FabrikantBOSCH
ModelME17.9.21
Geheugen / EPROMMICRO ST TRICORE - 12288 Kbit - 180000

Beschikbare tuning-opties:

  • Base timing
  • Minimum advance allowed
  • Minimum advance allowed protection
  • Optimal spark timing/MBT
  • Advance at part load
  • Knock correction advance max
  • Desired engine load calculation
  • Desired engine load calculation 2
  • Lambda correction f(IAT)
  • Desired throttle angle
  • Exhaust gas temperature
  • Exhaust gas temperature threshold for component protection
  • Engine torque limit for transmission protection
  • Factor to correct fuel delivery system
  • Engine idle vs. ECT sensor
  • Engine idle vs. ECT sensor 2
  • Rpm threshold fuel cut
  • Lambda enrichment for components protection
  • Lambda minimum value for components protection
  • Lambda correction for exhaust manifold temperature
  • RPM Limiter
  • RPM limiter - N
  • RPM limiter - R
  • Speed limiter
  • Throttle air mass flow calculation
  • Maximum throttle angle opening for a given RPM
  • Nominal throttle opening
  • Optimal engine moment
  • Power limit torque table
  • Requested torque map set 1
  • Requested torque map set 1 - monitoring
  • Requested torque map set 1 - monitoring 2
  • Requested torque map set 2
  • Requested torque map set 2 - monitoring
  • Requested torque map set 2 - monitoring 2
  • Requested torque map set 3
  • Requested torque map set 3 - monitoring
  • Requested torque map set 3 - monitoring 2
  • Driver torque request - MT
  • Requested torque map set 4 - monitoring
  • Requested torque map set 4 - monitoring 2

Firmware-identificatoren (11)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
1.91.01110SW087820 BOSCH ME17.9.21
1.91.01310SW081254 BOSCH ME17.9.21
1.91.00710SW083418 BOSCH ME17.9.21
1.91.00810SW079938 BOSCH ME17.9.21
1.91.00610SW081009 BOSCH ME17.9.21
1.91.00610SW082976 BOSCH ME17.9.21
1.91.02510SW087821 BOSCH ME17.9.21
1.91.01210SW079910 BOSCH ME17.9.21
1.91.00810SW087818 BOSCH ME17.9.21
1.91.00810SW097587 BOSCH ME17.9.21
1.91.00810SW086075 BOSCH ME17.9.21

ECU-notities

Microprocessor TC1724 To work on this ECU you can use NewTrasdata This Setting File can be used for serial system NewGenius.
Microprocessor TC1724 To work on this ECU you can use NewTrasdata This Setting File can be used for serial system NewGenius. ATTENTION - 35kW reduced power version file.
Microprocessor TC1724 To work on this ECU you can use NewTrasdata This Setting File can be used for serial system NewGenius. DP2 - Ducati Performance with full exhaust