DUCATI HYPERMOTARD 1100 07->09 66kW

ECU MARELLI 5AM · 90 CV (66 kW) · 1100 cc · Benzina aspirato

ECU-databaseDUCATI › DUCATI HYPERMOTARD 1100 07->09 66kW

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 11 firmwareversies

Voertuiggegevens

MerkDUCATI
ModelHYPERMOTARD 1100
Motor07->09 66kW
Standaard vermogen90 CV / 66 kW
Cilinderinhoud1100 cc
BrandstofBenzina aspirato
VoertuigtypeMoto

ECU

FabrikantMARELLI
Model5AM
Geheugen / EPROMHYBRID ECU - 2.048Kbit - 0x40000

Beschikbare tuning-opties:

  • Advance correction cylinder 2
  • Advance for ECT sensor
  • Advance at idle speed
  • Advance at part load
  • Advance for IAT sensor
  • Maximum torque at gear selection
  • Engine idle vs. ECT sensor
  • Injection correction cilinder 2
  • Injection period
  • Injection for ECT sensor
  • Injection at idle speed
  • Injection for IAT sensor
  • J
  • RPM Limiter
  • Cooling fan activation
  • Dashboard welcome message

Firmware-identificatoren (11)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
IAW5AMHW61022A9A9PH023 1.00.012STOCK MARELLI 5AM
IAW5AMHW61022A9ACPH024 1.00.003 MARELLI 5AM
IAW5AMHW61022AABA9SHA4 1.00.012 MARELLI 5AM
IAW5AMHW61022A9A9PH027 1.00.003STOCK MARELLI 5AM
IAW5AMHW61022ABBABSHA5 1.00.030DP STAGE 02 MARELLI 5AM
IAW5AMHW61096518708B 1.00.004 MARELLI 5AM
IAW5AMHW61022ABAABSHC4 1.00.015DP STAGE 03 MARELLI 5AM
IAW5AMHW61022AABA9SHB4 1.00.013DP STAGE 01 MARELLI 5AM
IAW5AMHW61022ABBABLH01 1.00.002 MARELLI 5AM
IAW5AMHW610 5AMDP22ABLH01 1.00.043STOCK MARELLI 5AM
IAW5AMHW610 5AMDR22ABLH06 1.00.003 MARELLI 5AM

Technische voertuignotities

ECU located in the engine bay to the right or left of the engine block, visible or hidden by a plastic lid. Difficulty:easy
OBD is located on the right side near the engine block. It may be necessary to remove the bulkheads.

ECU-notities

HYBRID ECU! This ECU does not have any accessible chip, it is not possible to use any eprom reader. In order to modify this ECU it is necessary to use the serial system. This Setting File can be used for serial system NewGenius.