DR AUTOMOBILES DR6.0 1.5L 16V 114kW/153HP ME17/MED17.8.10

ECU BOSCH ME17/MED17.8.10 · 155 CV (114 kW) · 1500 cc · Benzina sovralimentato

ECU-databaseDR AUTOMOBILES › DR AUTOMOBILES DR6.0 1.5L 16V 114kW/153HP ME17/MED17.8.10

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 2 firmwareversies

Voertuiggegevens

MerkDR AUTOMOBILES
ModelDR6.0
Motor1.5L 16V 114kW/153HP ME17/MED17.8.10
Standaard vermogen155 CV / 114 kW
Cilinderinhoud1500 cc
BrandstofBenzina sovralimentato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelME17/MED17.8.10
Geheugen / EPROMMICRO ST TRICORE - 12288 Kbit - 180000

Beschikbare tuning-opties:

  • Maximum air charge for overboost protection with turbocharger fault
  • Base timing
  • Optimal spark timing/MBT
  • Desired engine load calculation
  • Compression ratio for turbocharger protection
  • Exhaust gas temperature
  • Factor to correct fuel delivery system
  • Factor for reducing maximum filling
  • Advance limiter for component protection 1
  • Lambda enrichment for components protection
  • Lambda correction for exhaust manifold temperature
  • RPM Limiter
  • RPM limit for EOT sensor
  • Knock detection factor
  • Throttle air mass flow calculation
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Max torque profile
  • Optimal engine moment
  • Power limit torque table
  • Relative permissible torque from the pedal position in torque limitation
  • Pressure ratio depending on IAT
  • Maximum pressure ratio limit depending on temperature
  • Driver torque request
  • Torque limiter for selected gear
  • Throttle angle management

Firmware-identificatoren (2)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
F01R0AD2N9 1.94.016F21DD1A301 BOSCH ME17/MED17.8.10
F01R0AD0JU 1.94.008F21DD1A504 BOSCH ME17/MED17.8.10

ECU-notities

Microprocessor TC1728 This Setting File can be used for serial programming system NewGenius. To work on this ECU you can use NewTrasdata