Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
23 firmwareversies
Voertuiggegevens
| Merk | DODGE |
| Model | JOURNEY |
| Motor | 2.0L 16V CRD 103kW/138HP EDC16U31 |
| Standaard vermogen | 140 CV / 103 kW |
| Cilinderinhoud | 2000 cc |
| Brandstof | Diesel sovralimentato |
| Voertuigtype | Auto |
ECU
| Fabrikant | BOSCH |
| Model | EDC16U31 |
| Geheugen / EPROM | M58BW016DB PQFP80 - Flash 3_V 512 x 32 |
Beschikbare tuning-opties:
- Smoke limiter 2
- Main injection duration angle
- Boost pressure limiter
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- Boost pressure 2
- Boost pressure in aftertreatment modes
- Boost pressure in aftertreatment modes 2
- Boost pressure in aftertreatment modes 3
- EGR valve control
- EGR valve control 2
- EGR valve control 3
- EGR valve control 4
- EGR valve control in aftertreatment modes
- EGR valve control in aftertreatment modes 2
- Exhaust gas temperature
- Exhaust gas temperature 2
- Protection for engine overheating
- Basic torque management at engine cranking
- Engine idle vs. ECT sensor
- Gearbox maximum torque allowed
- Injection period
- Injection period - correction
- Maximum injection period
- Max injection limit - limp mode
- Injection 1
- Injection in aftertreatment modes 1
- Torque limiter 2
- Torque limiter
- Smoke limiter
- RPM limiter - fuel cut
- Lambda value of the smoke limitation
- Lambda value of the smoke limitation in aftertreatment modes
- Minimum LSU sensor temperature for O2
- Maximum LSU sensor temperature for O2
- LSU temperature threshold PID heater governor activation
- Protection for air load overheating
- Protection for exhaust gas temperature before turbine
- Protection for fuel overheating
- Protection for oil overheating
- Air mass flow
- Driver torque request
- Driver torque request 2
- CAT downstream temperature sensor characterization
- Torque limiter for the 1st gear selected
- Torque limiter for the 2nd gear selected
- Torque limiter for the 3rd gear selected
- Torque limiter for the 4th gear selected
- Torque limiter for the 5th gear selected
- Torque limiter for the 6th gear selected
- Torque limiter for selected gear
- Torque limiter for for reverse gear
- Torque limiter for the APS/BPS
- Torque limiter in recovery mode
- Torque limiter in recovery mode 2
- Turbocharger volumetric efficiency
- Variable geometry duty cycle limit
Firmware-identificatoren (23)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|
| — | 1037390630 |
1.67.040 | 1037395421 |
BOSCH EDC16U31 |
| — | 1037390628 |
1.67.005 | 1037392985 |
BOSCH EDC16U31 |
| — | 1037397862 |
1.67.016 | 1037397862 |
BOSCH EDC16U31 |
| — | 1037390628 |
1.67.016 | 1037395433 |
BOSCH EDC16U31 |
| — | 1037390628 |
1.67.014 | 1037397862 |
BOSCH EDC16U31 |
| — | 1037390628 |
1.67.016 | 1037395421 |
BOSCH EDC16U31 |
| — | 1037395420 |
1.67.015 | 1037397862 |
BOSCH EDC16U31 |
| — | 1037396493 |
1.67.011 | 1037397860 |
BOSCH EDC16U31 |
| — | 1037395433 |
1.67.020 | 1037396495 |
BOSCH EDC16U31 |
| — | 1037394130 |
1.67.018 | 1037395421 |
BOSCH EDC16U31 |
| — | 1037395421 |
1.67.019 | 1037396493 |
BOSCH EDC16U31 |
| — | 1037390629 |
1.67.007 | 1037395433 |
BOSCH EDC16U31 |
| — | 1037395433 |
1.67.025 | 1037396495 |
BOSCH EDC16U31 |
| — | 1037396495 |
1.67.011 | 1037397862 |
BOSCH EDC16U31 |
| — | 1037390628 |
1.67.009 | 1037395432 |
BOSCH EDC16U31 |
| — | 1037390629 |
1.67.023 | 1037395421 |
BOSCH EDC16U31 |
| — | 1037390125 |
1.67.020 | 1037393541 |
BOSCH EDC16U31 |
| — | 1037390628 |
1.67.022 | 1037396495 |
BOSCH EDC16U31 |
| — | 1037396081 |
1.67.008 | 1037397860 |
BOSCH EDC16U31 |
| — | 1037397860 |
1.67.014 | 1037397860 |
BOSCH EDC16U31 |
| — | 1037396495 |
1.67.021 | 1037396495 |
BOSCH EDC16U31 |
| — | 1037395421 |
1.67.017 | 1037395421 |
BOSCH EDC16U31 |
| — | 1037396493 |
1.67.023 | 1037396493 |
BOSCH EDC16U31 |
Technische voertuignotities
OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.
ECU-notities
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocesor Motorola MPC561/2/3/4. To work on this ECU you can use NewTrasdata This Setting File can be used for serial system : Genius or NewGenius.
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven
