DFSK FENGON/GLORY IX5 1.5L TURBO 101kW/135HP MG1UA008

ECU BOSCH MG1UA008 · 137 CV (101 kW) · 1500 cc · Benzina sovralimentato

ECU-databaseDFSK › DFSK FENGON/GLORY IX5 1.5L TURBO 101kW/135HP MG1UA008

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 1 firmwareversies

Voertuiggegevens

MerkDFSK
ModelFENGON/GLORY IX5
Motor1.5L TURBO 101kW/135HP MG1UA008
Standaard vermogen137 CV / 101 kW
Cilinderinhoud1500 cc
BrandstofBenzina sovralimentato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelMG1UA008
Geheugen / EPROMMicro STSPC574K72 - 20480 Kbit -280000

Beschikbare tuning-opties:

  • Base timing
  • Base timing 2
  • Knock correction advance max
  • Desired engine load calculation
  • Lambda correction
  • Lambda Correction 2
  • Lambda correction for engine temperature after starting
  • Compression ratio for turbocharger protection
  • Compression ratio limiting for compressor depending on IAT sensor
  • Exhaust gas temperature
  • Exhaust gas temperature 2
  • Factor to correct fuel delivery system
  • Factor for reducing maximum filling
  • Advance limiter for component protection 1
  • Lambda enrichment for components protection
  • Lambda correction for exhaust manifold temperature
  • Lambda driver wish
  • Knock detection factor
  • Throttle air mass flow calculation
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Max torque profile
  • Optimal engine moment
  • Power limit torque table
  • Driver torque request
  • Torque limiter for selected gear
  • Throttle angle management
  • Turbocharger volumetric efficiency

Firmware-identificatoren (1)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
F01R00DJ1UAK1407D401 1.94.005AK1407D401 BOSCH MG1UA008

ECU-notities

This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata