DAF XF 95 430 12.6L 316kW/424HP MS6.2

ECU BOSCH EDC MS6.2 · 430 CV (316 kW) · 12600 cc · Diesel sovralimentato

ECU-databaseDAF › DAF XF 95 430 12.6L 316kW/424HP MS6.2

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 5 firmwareversies

Voertuiggegevens

MerkDAF
ModelXF 95
Motor430 12.6L 316kW/424HP MS6.2
Standaard vermogen430 CV / 316 kW
Cilinderinhoud12600 cc
BrandstofDiesel sovralimentato
VoertuigtypeTir

ECU

FabrikantBOSCH
ModelEDC MS6.2
Geheugen / EPROM2 X 29F010 PLCC32 1Mbit

Beschikbare tuning-opties:

  • Boost pressure
  • Injection at part load 2
  • Injection correction 2
  • Injection period
  • Injection at idle speed
  • Injection at part load
  • Injection correction
  • Torque limiter

Firmware-identificatoren (5)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
1.02.002 BOSCH EDC MS6.2
02810100451037351256/7 1.00.115P060V62 BOSCH EDC MS6.2
0281010045103735XXXX/X 1.00.109P060V64 BOSCH EDC MS6.2
02810100451037351256/7 1.00.111P060V52 BOSCH EDC MS6.2
0281010045103735XXXX/X 1.00.119P060V52 BOSCH EDC MS6.2

ECU-notities

2 original EPROM 27C010 or 29F010 PLCC 32 pins. To read this EPROM with the EMP20/21 programmer you need PD32 adapters. On this epron can be set a KEY. WARNING !! The eprom HHH has lower eprom number on the label. Please note that you have to modify all the injection maps with the same development increments for high performances. This Setting File can be used for serial programming system NewGenius.