DAEWOO GM NUBIRA 2.0L 16V 98kW/131HP DELCO

ECU DELCO CWNL · 133 CV (98 kW) · 2000 cc · Benzina aspirato

ECU-databaseDAEWOO GM › DAEWOO GM NUBIRA 2.0L 16V 98kW/131HP DELCO

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 4 firmwareversies

Voertuiggegevens

MerkDAEWOO GM
ModelNUBIRA
Motor2.0L 16V 98kW/131HP DELCO
Standaard vermogen133 CV / 98 kW
Cilinderinhoud2000 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantDELCO
ModelCWNL
Geheugen / EPROM29F010 PLCC32 1Mbit - 128K x 8

Beschikbare tuning-opties:

  • Spark advance during acceleration
  • Advance at idle speed
  • Advance at part load
  • Advance correction
  • Advance full load
  • Injection at part load
  • Injection correction for IAT sensor
  • Injection at full throttle

Firmware-identificatoren (4)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
1.00.005 DELCO CWNL
CJZT 1.00.003 DELCO DELCO
CKBW 1.00.004 DELCO DELCO
CMPR G2 1.00.011 DELCO DELCO

Technische voertuignotities

OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.

ECU-notities

Original EPROM 29F010 PLCC 32 pins To read this EPROM with the EMP20/21 programmer you need PD32 adapters.
Original EPROM 27C512 PLCC 32 pins To read this EPROM with the EMP20 programmer you need PD28 adapters. Attention !! The EMP21 instead needs the PD32 adapters.