CITROEN XSARA 1.6L 16V VTS 81kW/109HP ME7.4.4

ECU BOSCH ME7.4.4 · 110 CV (81 kW) · 1600 cc · Benzina aspirato

ECU-databaseCITROEN › CITROEN XSARA 1.6L 16V VTS 81kW/109HP ME7.4.4

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 10 firmwareversies

Voertuiggegevens

MerkCITROEN
ModelXSARA
Motor1.6L 16V VTS 81kW/109HP ME7.4.4
Standaard vermogen110 CV / 81 kW
Cilinderinhoud1600 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelME7.4.4
Geheugen / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Beschikbare tuning-opties:

  • Base timing
  • Advance at idle speed
  • Optimal spark timing/MBT
  • Desired engine load calculation
  • Exhaust gas temperature
  • Lambda enrichment for components protection
  • RPM Limiter
  • Lambda driver wish
  • Knock detection factor
  • Optimal engine moment
  • Driver torque request
  • Driver torque request 2

Firmware-identificatoren (10)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02612066061037353509 1.32.0159644219780 BOSCH ME7.4.4
02612066061037367958 1.32.0179651396380 BOSCH ME7.4.4
02612066061037353328 1.32.0159643148380 BOSCH ME7.4.4
02612066061037364035 1.32.0189647345280 BOSCH ME7.4.4
02612066061037366739 1.32.0159649426780 BOSCH ME7.4.4
02612066331037353565 1.32.0159644842980 BOSCH ME7.4.4
02612066331037353163 1.32.0239641747580 BOSCH ME7.4.4
02612072231037353532 1.32.0149643618180 BOSCH ME7.4.4
02612076921037371016 1.32.0059657193180 BOSCH ME7.4.4
96387659801037372838 1.32.0089653702380 BOSCH ME7.4.4

Technische voertuignotities

OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.

ECU-notities

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial programming system NewGenius.