CITROEN SAXO 1.6L 8V 73kW/98HP ME7.4

ECU BOSCH ME7.4 · 99 CV (73 kW) · 1600 cc · Benzina aspirato

ECU-databaseCITROEN › CITROEN SAXO 1.6L 8V 73kW/98HP ME7.4

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 9 firmwareversies

Voertuiggegevens

MerkCITROEN
ModelSAXO
Motor1.6L 8V 73kW/98HP ME7.4
Standaard vermogen99 CV / 73 kW
Cilinderinhoud1600 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelME7.4
Geheugen / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Beschikbare tuning-opties:

  • Advance at part load
  • Desired engine load calculation
  • Exhaust gas temperature
  • Advance limiter
  • Lambda enrichment for components protection
  • RPM Limiter
  • Knock detection factor
  • Optimal engine moment

Firmware-identificatoren (9)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02612062461037353768 1.32.0179645802280 BOSCH ME7.4
02612068601037353101 1.32.0209642350680 BOSCH ME7.4
02612068601037353101 1.32.0329642350680 BOSCH ME7.4
02612062461037353467 1.32.0069643897680 BOSCH ME7.4.4
02612068601037353766 1.32.0219645800280 BOSCH ME7.4.4
02612068601037368532 1.32.0069653492480 BOSCH ME7.4.4
02612068601037353564 1.32.0149644842880 BOSCH ME7.4.4
02612068601037353179 1.32.0159640661980 BOSCH ME7.4.4
02612068601037353463 1.32.0299643897880 BOSCH ME7.4.4

Technische voertuignotities

OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.

ECU-notities

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This Setting File can be used for serial programming system NewGenius.
Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This Setting File can be used for serial programming system NewGenius. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!