CITROEN SAXO 1.1L 8V 44kW/59HP ME7.4

ECU BOSCH ME7.4 · 60 CV (44 kW) · 1100 cc · Benzina aspirato

ECU-databaseCITROEN › CITROEN SAXO 1.1L 8V 44kW/59HP ME7.4

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 5 firmwareversies

Voertuiggegevens

MerkCITROEN
ModelSAXO
Motor1.1L 8V 44kW/59HP ME7.4
Standaard vermogen60 CV / 44 kW
Cilinderinhoud1100 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelME7.4
Geheugen / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Beschikbare tuning-opties:

  • Advance at part load
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • Knock detection factor
  • Air mass flow

Firmware-identificatoren (5)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02612062461037371002 1.00.0169656913280 BOSCH ME7.4
02612062461037353630 1.32.0149644843280 BOSCH ME7.4
02612062461037353768 1.32.0139645802280 BOSCH ME7.4
02612070221037353562 1.32.0099640899980 BOSCH ME7.4
02612070221037353326 1.32.0149643057280 BOSCH ME7.4

Technische voertuignotities

OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.

ECU-notities

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial programming system NewGenius.