CITROEN JUMPY 2.0L 8V HDI 69kW/93HP EDC15C2

ECU BOSCH EDC15C2 · 94 CV (69 kW) · 2000 cc · Diesel sovralimentato

ECU-databaseCITROEN › CITROEN JUMPY 2.0L 8V HDI 69kW/93HP EDC15C2

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 9 firmwareversies

Voertuiggegevens

MerkCITROEN
ModelJUMPY
Motor2.0L 8V HDI 69kW/93HP EDC15C2
Standaard vermogen94 CV / 69 kW
Cilinderinhoud2000 cc
BrandstofDiesel sovralimentato
VoertuigtypeLCV

ECU

FabrikantBOSCH
ModelEDC15C2
Geheugen / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Beschikbare tuning-opties:

  • Boost pressure limiter
  • Boost pressure
  • EGR valve control
  • Injection at part load
  • Injection at full throttle
  • Torque limiter
  • Smoke limiter
  • Air mass flow
  • Overboost timing

Firmware-identificatoren (9)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02810103591037353045 1.05.017 BOSCH EDC15C2
02810105911037353871 1.05.0091037353871 BOSCH EDC15C2
02810108151037353963 1.05.0081037353963 BOSCH EDC15C2
02810108151037370509 1.05.0061037370509 BOSCH EDC15C2
02810108151037353822 1.05.0051037353963 BOSCH EDC15C2
02810108161037353626 1.05.010 BOSCH EDC15C2
02810113421037376576 1.05.0041037376576 BOSCH EDC15C2
02810113431037364457 1.05.0131037364457 BOSCH EDC15C2
02810114491037371449 1.05.0081037371449 BOSCH EDC15C2

Technische voertuignotities

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU-notities

Original EPROM PSOP 44 pins 29F400BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This Setting File can be used for serial programming system NewGenius.
Original EPROM PSOP 44 pins 29F400BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This Setting File can be used for serial system : Genius or NewGenius.