CITROEN JUMPY 2.0L 16V BlueHDi 110kW/148HP DCM6.2A

ECU DELPHI DCM6.2A · 150 CV (11 kW) · 2000 cc · Diesel sovralimentato

ECU-databaseCITROEN › CITROEN JUMPY 2.0L 16V BlueHDi 110kW/148HP DCM6.2A

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 6 firmwareversies

Voertuiggegevens

MerkCITROEN
ModelJUMPY
Motor2.0L 16V BlueHDi 110kW/148HP DCM6.2A
Standaard vermogen150 CV / 11 kW
Cilinderinhoud2000 cc
BrandstofDiesel sovralimentato
VoertuigtypeAuto

ECU

FabrikantDELPHI
ModelDCM6.2A
Geheugen / EPROMMICRO BGA FREESCALE MPC5674F - 32768 Kbit - 400000

Beschikbare tuning-opties:

  • Boost pressure limiter 2
  • Boost pressure limiter 3
  • Maximum engine boost pressure F (atmospheric pressure)
  • Boost pressure limit control
  • Boost pressure
  • Boost pressure 2
  • Boost pressure F (temperature)
  • Load / throttle position reference
  • Load / throttle position reference 2
  • Load / throttle position reference 3
  • Max exhaust gas temperature curve for full load
  • Basic torque management at engine cranking
  • Injection period
  • Injection period 2
  • Injection period 3
  • Injection period 4
  • Injection period 5
  • Injection opening time related to inj. pressure
  • J
  • Injection 2
  • Injection 3
  • Injection 4
  • Injection 5
  • Torque limiter
  • Torque limiter for smoke limitation
  • Maximum indicated torque
  • Maximum indicated virtual torque
  • Maximum engine power
  • Throttle air mass flow calculation
  • Max torque profile
  • Max torque profile - AT
  • Max torque profile for diagnostic
  • Max torque profile - MT
  • Specific injection pressure limiter
  • Specific injection pressure limiter for EFT sensor
  • Specific injection pressure
  • Specific injection pressure 2
  • Specific injection pressure 5
  • Specific injection pressure 6
  • Driver torque request
  • Driver torque request for medium speed
  • Driver torque request for low speed
  • Driver torque request from MAP sensor
  • Driver torque request at the start
  • Driver torque request for reverse gear
  • Torque limiter for gear-shift too long
  • Torque limiter for selected gear
  • Torque limiter for the APS/BPS
  • Torque limit table for IAT sensor
  • Torque limiter for EFT sensor
  • Torque limit table for EOT sensor
  • Torque limit table for the rail pressure demand
  • Torque limit table for ECT sensor
  • Take-off torque law from MAP sensor

Firmware-identificatoren (6)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
98094479809809447980 1.84.0059693332280 DELPHI DCM6.2A
98094479809809447980 1.00.0099695353780 DELPHI DCM6.2A
98094479809809447980 1.84.0099692272580 DELPHI DCM6.2A
98094479809809447980 1.84.0189693231180 DELPHI DCM6.2A
98094479809809447980 1.00.0159693142780 DELPHI DCM6.2A
98094479809809447980 1.00.0029692490880 DELPHI DCM6.2A

ECU-notities

Microprocessor BGA FREESCALE MPC5674F This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop