CITROEN C8 2.0L 16V HDI 79kW/106HP EDC15C2

ECU BOSCH EDC15C2 · 107 CV (79 kW) · 2000 cc · Diesel sovralimentato

ECU-databaseCITROEN › CITROEN C8 2.0L 16V HDI 79kW/106HP EDC15C2

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 15 firmwareversies

Voertuiggegevens

MerkCITROEN
ModelC8
Motor2.0L 16V HDI 79kW/106HP EDC15C2
Standaard vermogen107 CV / 79 kW
Cilinderinhoud2000 cc
BrandstofDiesel sovralimentato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelEDC15C2
Geheugen / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Beschikbare tuning-opties:

  • Boost pressure limiter
  • Boost pressure
  • EGR valve control
  • Injection at part load
  • Injection at full throttle
  • Torque limiter
  • Smoke limiter
  • Specific injection pressure limiter
  • Specific injection pressure
  • Air mass flow
  • Overboost timing

Firmware-identificatoren (15)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02810110321037354308 1.05.018 BOSCH EDC15C2
02810110321037364308 1.05.0081037364308 BOSCH EDC15C2
02810113341037364402 1.05.0051037383676 BOSCH EDC15C2
02810113341037364402 1.05.0061037364402 BOSCH EDC15C2
02810113341037368584 1.05.0131037368584 BOSCH EDC15C2
02810118001037372014 1.05.0061037383360 BOSCH EDC15C2
02810119601037353960 1.05.0131037353960 BOSCH EDC15C2
02810119681037374130 1.05.0041037372016 BOSCH EDC15C2
02810119681037372016 1.05.0061037375144 BOSCH EDC15C2
02810119681037372016 1.05.0111037383675 BOSCH EDC15C2
02810119681037374130 1.05.0161037383675 BOSCH EDC15C2
02810124621037378642 1.05.0121037378642 BOSCH EDC15C2
02810124631037383032 1.05.0041037383604 BOSCH EDC15C2
02810124631037378680 1.05.0121037378680 BOSCH EDC15C2
02810124631037378680 1.05.0091037383604 BOSCH EDC15C2

Technische voertuignotities

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU-notities

Original EPROM PSOP 44 pins 29F400BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This Setting File can be used for serial programming system NewGenius.