CITROEN C5 (RD/TD) 2.0L 16V HDI 100kW/136HP DCM3.5

ECU DELPHI DCM3.5 · 136 CV (1 kW) · 2000 cc · Diesel sovralimentato

ECU-databaseCITROEN › CITROEN C5 (RD/TD) 2.0L 16V HDI 100kW/136HP DCM3.5

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 5 firmwareversies

Voertuiggegevens

MerkCITROEN
ModelC5 (RD/TD)
Motor2.0L 16V HDI 100kW/136HP DCM3.5
Standaard vermogen136 CV / 1 kW
Cilinderinhoud2000 cc
BrandstofDiesel sovralimentato
VoertuigtypeAuto

ECU

FabrikantDELPHI
ModelDCM3.5
Geheugen / EPROMMICRO BGA MOTOROLA FREESCALE con FLASH interna MPC5566 24576 Kbit - 0x300000

Beschikbare tuning-opties:

  • Boost pressure limiter
  • Boost pressure
  • EGR valve control
  • Injection opening time related to inj. pressure
  • Torque limiter 2
  • Torque limiter 3
  • Torque limiter 4
  • Torque limiter
  • Torque limiter for smoke limitation
  • Specific injection pressure limiter
  • Specific injection pressure limiter for EFT sensor
  • Specific injection pressure
  • Specific injection pressure 2
  • Air mass flow
  • Driver torque request
  • Driver torque request for high speed
  • Driver torque request for low speed
  • Driver torque request at the start
  • Driver torque request for reverse gear
  • Torque limiter for EFT sensor
  • Torque limit table for ECT sensor
  • Torque model - fuel quantity to torque conversion
  • Torque model - torque to fuel quantity conversion
  • Variable geometry duty cycle limit

Firmware-identificatoren (5)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
96669125809666912580 1.00.0059679060480 DELPHI DCM3.5
96669125809666912580 1.00.0029691891280 DELPHI DCM3.5
96669125809666912580 1.00.0059678799680 DELPHI DCM3.5
96669125809666912580 1.00.0069691889080 DELPHI DCM3.5
96669125809666912580 1.00.0039679011280 DELPHI DCM3.5

Technische voertuignotities

OBD with lid located in the central tunnel under the parking brake lever.

ECU-notities

Microprocessor FMPC 5566 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop