CITROEN C4 MK2 1.6L 16V e-HDI 84kW/114HP SID807

ECU CONTINENTAL-SIEMENS-VDO SID807 · 114 CV (84 kW) · 1600 cc · Diesel sovralimentato

ECU-databaseCITROEN › CITROEN C4 MK2 1.6L 16V e-HDI 84kW/114HP SID807

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 23 firmwareversies

Voertuiggegevens

MerkCITROEN
ModelC4 MK2
Motor1.6L 16V e-HDI 84kW/114HP SID807
Standaard vermogen114 CV / 84 kW
Cilinderinhoud1600 cc
BrandstofDiesel sovralimentato
VoertuigtypeAuto

ECU

FabrikantCONTINENTAL-SIEMENS-VDO
ModelSID807
Geheugen / EPROMM58BW016DB PQFP80 - Flash 3_V 512 x 32

Beschikbare tuning-opties:

  • Boost pressure limiter for diagnostics
  • Boost pressure limiter
  • BAP setpoint limitation depending on before particulate filter pressure in aftertreatment modes
  • Boost pressure
  • Boost pressure 2
  • Boost pressure 3
  • Boost pressure 4
  • Load / throttle position reference
  • Exhaust gas temperature value before turbine in regular injection mode
  • Injection opening time related to inj. pressure
  • J
  • Torque limiter 2
  • Torque limiter
  • Intake manifold pressure
  • Throttle air mass flow calculation
  • Max torque profile
  • Specific injection pressure limiter
  • Specific injection pressure
  • Driver torque request for high speed
  • Driver torque request for medium speed
  • Driver torque request for low speed
  • Driver torque request at the start
  • Driver torque request for reverse gear
  • Torque limiter for EFT sensor
  • Torque limit table for ECT sensor
  • Torque model - fuel quantity to torque conversion
  • Variable geometry duty cycle limit

Firmware-identificatoren (23)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
96632414809666571380 1.83.0079667366980 CONTINENTAL-SIEMENS-VDO SID807
96632414809666681180 1.83.0069691616980 CONTINENTAL-SIEMENS-VDO SID807EVO
96632414809666681180 1.83.0129691833380 CONTINENTAL-SIEMENS-VDO SID807EVO
96632414809666681180 1.83.0239667336980 CONTINENTAL-SIEMENS-VDO SID807EVO
96632414809666681180 1.83.0159679240680 CONTINENTAL-SIEMENS-VDO SID807EVO
96632414809666681180 1.83.0059691737880 CONTINENTAL-SIEMENS-VDO SID807EVO
96632414809666681180 1.83.0129691737980 CONTINENTAL-SIEMENS-VDO SID807EVO
96632414809666681180 1.83.0149692020280 CONTINENTAL-SIEMENS-VDO SID807EVO
96632414809666681180 1.83.0049678917780 CONTINENTAL-SIEMENS-VDO SID807EVO
96632414809666681180 1.83.0059691765880 CONTINENTAL-SIEMENS-VDO SID807EVO
96632414809666681180 1.83.0039691569780 CONTINENTAL-SIEMENS-VDO SID807EVO
96632414809666681180 1.83.0039691787080 CONTINENTAL-SIEMENS-VDO SID807EVO
96632414809666681180 1.83.0049691833680 CONTINENTAL-SIEMENS-VDO SID807EVO
96632414809666681180 1.83.0119691834280 CONTINENTAL-SIEMENS-VDO SID807EVO
96632414809666681180 1.83.0069691677180 CONTINENTAL-SIEMENS-VDO SID807EVO
96632414809666681180 1.83.0119691570680 CONTINENTAL-SIEMENS-VDO SID807EVO
96632414809666681180 1.83.0059678982280 CONTINENTAL-SIEMENS-VDO SID807EVO
96632414809666681180 1.83.0089679122880 CONTINENTAL-SIEMENS-VDO SID807EVO
96666811809666681180 1.83.0049692316880 CONTINENTAL-SIEMENS-VDO SID807EVO
96666811809666681180 1.83.0259691833380 CONTINENTAL-SIEMENS-VDO SID807EVO
96666811809666681180 1.83.0189691923480 CONTINENTAL-SIEMENS-VDO SID807EVO
96666811809666681180 1.83.0039691834280 CONTINENTAL-SIEMENS-VDO SID807EVO
96666811809666681180 1.83.0119691833680 CONTINENTAL-SIEMENS-VDO SID807EVO

Technische voertuignotities

OBD with lid located in the central tunnel, ion the tray between the gear lever and the air conditioning controls.

ECU-notities

MICRO Infineon Tricore TC1797 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop