Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
✓ Aanvullende module beschikbaar 9 firmwareversies
Voertuiggegevens
| Merk | CITROEN |
| Model | C4 MK1 |
| Motor | 1.6L 16V HDI 66kW/88HP EDC16C34 |
| Standaard vermogen | 90 CV / 66 kW |
| Cilinderinhoud | 1600 cc |
| Brandstof | Diesel sovralimentato |
| Voertuigtype | Auto |
ECU
| Fabrikant | BOSCH |
| Model | EDC16C34 |
| Geheugen / EPROM | M58BW016DB PQFP80 - Flash 3_V 512 x 32 |
Beschikbare tuning-opties:
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- Boost pressure in aftertreatment modes
- Boost pressure F (temperature)
- EGR valve control
- EGR valve control 2
- Basic torque management at engine cranking
- Injection period
- Injection period 2
- Injection opening time related to inj. pressure
- Injection opening time related to inj. pressure 2
- Injection period in aftertreatment modes
- Max injection limit
- Max injection limit - limp mode
- J
- Injection in aftertreatment modes 1
- Injection in aftertreatment modes 2
- Injection in aftertreatment modes 3
- L
- Torque limiter
- Lambda value of the smoke limitation
- Injection quantity for engine overheating protection
- Protection for fuel overheating
- Pressure control map over pressure regulating valve
- Specific injection pressure limiter
- Specific injection pressure limiter for EFT sensor
- Specific injection pressure
- Specific injection pressure in aftertreatment modes
- Specific pressure injection after starting
- Air mass flow
- Driver torque request
- Driver torque request 2
- Driver torque request for high speed - AT
- Driver torque request for low speed - AT
- Driver torque request for reverse gear
- CAT downstream temperature sensor characterization
- Torque limiter for the 1st gear selected
- Torque limiter for the 2nd gear selected
- Torque limiter for the 3rd gear selected
- Torque limiter for the 4th gear selected
- Torque limiter for the 5th gear selected
- Torque limiter for the 6th gear selected
- Torque limiter for selected gear - AT
- Torque limiter for the APS/BPS
- Torque limiter in recovery mode
- Take-off torque law in Normal mode
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit in regeneration mode
- Variable geometry duty cycle limit in regeneration mode 2
- Variable geometry duty cycle limit in regeneration mode 3
Firmware-identificatoren (9)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|
| — | — |
1.67.016 | 1037380727 |
BOSCH EDC16C34 |
| — | — |
1.67.003 | 1037398250 |
BOSCH EDC16C34 |
| — | — |
1.67.028 | 1037393474 |
BOSCH EDC16C34 |
| — | — |
1.67.018 | 1037395375 |
BOSCH EDC16C34 |
| — | — |
1.67.012 | 1037501019 |
BOSCH EDC16C34 |
| — | — |
1.67.006 | 1037371087 |
BOSCH EDC16C34 |
| — | — |
1.67.016 | 1037386103 |
BOSCH EDC16C34 |
| — | — |
1.67.010 | 1037398225 |
BOSCH EDC16C34 |
| — | — |
1.67.024 | 1037386141 |
BOSCH EDC16C34 |
Technische voertuignotities
OBD with lid located in the central tunnel, ion the tray between the gear lever and the air conditioning controls.
ECU-notities
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Aanvullende modules beschikbaar
A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven
