CITROEN BERLINGO Mk2 (B9) 1.6L 16V VTi 88kW/118HP MEV17.4.2

ECU BOSCH MEV17.4.2 · 120 CV (88 kW) · 1600 cc · Benzina aspirato

ECU-databaseCITROEN › CITROEN BERLINGO Mk2 (B9) 1.6L 16V VTi 88kW/118HP MEV17.4.2

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 1 firmwareversies

Voertuiggegevens

MerkCITROEN
ModelBERLINGO Mk2 (B9)
Motor1.6L 16V VTi 88kW/118HP MEV17.4.2
Standaard vermogen120 CV / 88 kW
Cilinderinhoud1600 cc
BrandstofBenzina aspirato
VoertuigtypeLCV

ECU

FabrikantBOSCH
ModelMEV17.4.2
Geheugen / EPROMMICRO ST TRICORE - 16384 Kbit - 200000

Beschikbare tuning-opties:

  • Base timing
  • Optimal spark timing/MBT
  • Exhaust gas temperature
  • Injection 1
  • Torque limiter for diagnostic
  • Lambda enrichment for components protection
  • Lambda correction for exhaust manifold temperature
  • RPM Limiter
  • Knock detection factor
  • MAF sensor calibration
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Max torque profile
  • Optimal engine moment
  • Offset tolerance depending on permissible torque
  • Relative permissible torque from the pedal position in torque limitation
  • Driver torque request
  • Throttle angle management

Firmware-identificatoren (1)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
0261S064721037510433 1.94.008 BOSCH MEV17.4.2

Technische voertuignotities

OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.

ECU-notities

MICRO Infineon Tricore TC1767 To work on this ECU you can use NewTrasdata

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop