CHEVROLET US/EU/SAM TRAX 1.8L 16V MFI 103kW/138HP DELCO E83

ECU DELCO E83 · 140 CV (103 kW) · 1800 cc · Benzina aspirato

ECU-databaseCHEVROLET US/EU/SAM › CHEVROLET US/EU/SAM TRAX 1.8L 16V MFI 103kW/138HP DELCO E83

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 2 firmwareversies

Voertuiggegevens

MerkCHEVROLET US/EU/SAM
ModelTRAX
Motor1.8L 16V MFI 103kW/138HP DELCO E83
Standaard vermogen140 CV / 103 kW
Cilinderinhoud1800 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantDELCO
ModelE83
Geheugen / EPROMMICRO BGA MOTOROLA FREESCALE con FLASH interna MPC5554 16384 Kbit - 0x200000

Beschikbare tuning-opties:

  • Engine ignition timing versus temperature
  • Advance at idle speed
  • Lambda/AFR full load/WOT
  • Optimal spark timing/MBT
  • Requested spark advance - high octane
  • Requested spark advance - low octane
  • Desired engine load calculation
  • Variable exhaust camshaft timing 2
  • Variable exhaust camshaft timing
  • ECT for fan engagement
  • Engine idle
  • Engine idle in Park position
  • IVC
  • Variable intake camshaft timing
  • Torque limiter 2
  • Torque limiter 3
  • Torque limiter
  • Torque limiter for the 1st gear selected
  • Torque limiter for the 2nd gear selected
  • Torque limiter for the 3rd gear selected
  • Torque limiter for the 4th gear selected
  • Torque limiter for the 5th gear selected
  • Throttle angle management

Firmware-identificatoren (2)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
1264292612654173 1.35.00392285027 DELCO E83
1264292612654173 1.35.00992271415 DELCO E83

Technische voertuignotities

OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.

ECU-notities

Microprocessor ST10F275 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata