CHEVROLET US/EU/SAM TRAILBLAZER Mk2 2.5L 16V TDI 132kW/177HP DELCO E98

ECU DELCO E98 · 179 CV (132 kW) · 2500 cc · Diesel sovralimentato

ECU-databaseCHEVROLET US/EU/SAM › CHEVROLET US/EU/SAM TRAILBLAZER Mk2 2.5L 16V TDI 132kW/177HP DELCO E98

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 1 firmwareversies

Voertuiggegevens

MerkCHEVROLET US/EU/SAM
ModelTRAILBLAZER Mk2
Motor2.5L 16V TDI 132kW/177HP DELCO E98
Standaard vermogen179 CV / 132 kW
Cilinderinhoud2500 cc
BrandstofDiesel sovralimentato
VoertuigtypeAuto

ECU

FabrikantDELCO
ModelE98
Geheugen / EPROMMICRO BGA FREESCALE MPC5674F - 32768 Kbit - 400000

Beschikbare tuning-opties:

  • Maximum engine boost pressure F (atmospheric pressure)
  • Boost pressure
  • Protection for cylinder head overheating
  • Maximum torque limitation at clutch
  • Compression ratio for turbocharger protection
  • Max torque correction factor for APS sensor
  • Engine idle vs. ECT sensor
  • Injection period
  • Maximum injection period
  • Injection opening time related to inj. pressure
  • Initialization values over pressure control valve
  • Torque limiter 2
  • Torque limiter 3
  • Torque limiter
  • Max desired pressure ratio limit
  • RPM Limiter
  • Lambda value of the smoke limitation
  • Speed limiter
  • Speed limiter 2
  • MAF sensor calibration
  • Maximum indicated torque
  • Torque/load reduction for overheating protection
  • Pressure control map over pressure regulating valve
  • Specific injection pressure limiter
  • Specific injection pressure limiter for EFT sensor
  • Specific injection pressure
  • Specific air mass charge
  • Delco driver torque request
  • Torque limiter for selected gear
  • Setpoint maximum turbocharger speed
  • Setpoint maximum turbocharger speed - turbocharger protection
  • Torque limiter in recovery mode
  • Torque model - torque to fuel quantity conversion
  • Turbocharger volumetric efficiency
  • Variable geometry duty cycle limit

Firmware-identificatoren (1)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
A2C92816900155491998 1.83.00455489648 DELCO E98

ECU-notities

Microprocessor BGA FREESCALE MPC5674F This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata