Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
✓ Aanvullende module beschikbaar 7 firmwareversies
Voertuiggegevens
| Merk | CHEVROLET US/EU/SAM |
| Model | CRUZE Mk1 |
| Motor | 1.4L 16V TURBO 103kW/140HP DELCO E78 |
| Standaard vermogen | 140 CV / 103 kW |
| Cilinderinhoud | 1400 cc |
| Brandstof | Benzina sovralimentato |
| Voertuigtype | Auto |
ECU
| Fabrikant | DELCO |
| Model | E78 |
| Geheugen / EPROM | MICRO BGA MOTOROLA FREESCALE con FLASH interna MPC5566 24576 Kbit - 0x300000 |
Beschikbare tuning-opties:
- Engine ignition timing versus temperature
- Advance at idle speed
- Lambda/AFR full load/WOT
- Optimal spark timing/MBT
- Spark advance correction for ECT sensor
- Requested spark advance - high octane
- Requested spark advance - low octane
- Boost pressure
- Desired engine load calculation
- Variable exhaust camshaft timing 2
- Variable exhaust camshaft timing
- ECT for fan engagement
- Engine idle
- Engine idle in Park position
- Variable intake camshaft timing 2
- Variable intake camshaft timing
- Torque limiter 2
- Torque limiter
- Lambda enrichment - open loop
- Torque limiter for the 1st gear selected
- Torque limiter for the 2nd gear selected
- Torque limiter for the 3rd gear selected
- Torque limiter for the 4th gear selected
- Torque limiter for the 5th gear selected
- Throttle angle management
- WG duty cycle vs RPM and boost
Firmware-identificatoren (7)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|
| 12647136 | 12654130 |
1.91.008 | 55592709 |
DELCO E78 |
| 12647136 | 12656286 |
1.91.006 | 92280934 |
DELCO E78 |
| 12647136 | 12669509 |
1.91.006 | 92285793 |
DELCO E78 |
| 12647136 | 12656286 |
1.91.048 | 55597337 |
DELCO E78 |
| 12647136 | 12654130 |
1.91.009 | 55593682 |
DELCO E78 |
| 12647136 | 12655493 |
1.91.009 | 55597665 |
DELCO E78 |
| 12647136 | 12655493 |
1.91.008 | 55592938 |
DELCO E78 |
Technische voertuignotities
OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.
ECU-notities
Microprocessor FMPC 5566 This Setting File can be used for serial system NewGenius. ATTENTION: before proceding with any serial operation please read carefully the corresponding protocol serial manual. To work on this ECU you can use NewTrasdata
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven
