CHEVROLET US/EU/SAM CAPTIVA I 2.4L 16V 120kW/161HP DELCO E37

ECU DELCO E37 · 163 CV (12 kW) · 2400 cc · Benzina aspirato

ECU-databaseCHEVROLET US/EU/SAM › CHEVROLET US/EU/SAM CAPTIVA I 2.4L 16V 120kW/161HP DELCO E37

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 7 firmwareversies

Voertuiggegevens

MerkCHEVROLET US/EU/SAM
ModelCAPTIVA I
Motor2.4L 16V 120kW/161HP DELCO E37
Standaard vermogen163 CV / 12 kW
Cilinderinhoud2400 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantDELCO
ModelE37
Geheugen / EPROMM58BW016DB PQFP80 - Flash 3_V 512 x 32

Beschikbare tuning-opties:

  • Engine ignition timing versus temperature
  • Advance at idle speed
  • Lambda/AFR full load/WOT
  • Optimal spark timing/MBT
  • Spark advance correction for ECT sensor
  • Requested spark advance - high octane
  • Requested spark advance - low octane
  • Variable exhaust camshaft timing 2
  • Variable exhaust camshaft timing
  • ECT for fan engagement
  • Engine idle
  • Engine idle in Park position
  • IVC
  • Variable intake camshaft timing
  • RPM Limiter
  • Speed limiter
  • Torque limiter for the 1st gear selected
  • Torque limiter for the 2nd gear selected
  • Torque limiter for the 3rd gear selected
  • Torque limiter for the 4th gear selected
  • Torque limiter for the 5th gear selected
  • Torque limiter for the 6th gear selected
  • Torque limiter for for reverse gear
  • Throttle angle management

Firmware-identificatoren (7)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
12653292 1.00.00392269077 DELCO E37
12657728 1.35.01192290962 DELCO E37
12647468 1.00.00392269076 DELCO E37
12634915 1.35.00892263217 DELCO E37
12634915 1.35.00992259207 DELCO E37
12634915 1.35.00992263218 DELCO E37
12653628 1.35.00892293710 DELCO E37

Technische voertuignotities

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU-notities

To work on this ECU you can use NewTrasdata