CHERY TIGGO 3 2.0L 16V 100kW/134HP ME7.9.7

ECU BOSCH ME7.9.7 · 136 CV (1 kW) · 2000 cc · Benzina aspirato

ECU-databaseCHERY › CHERY TIGGO 3 2.0L 16V 100kW/134HP ME7.9.7

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 1 firmwareversies

Voertuiggegevens

MerkCHERY
ModelTIGGO 3
Motor2.0L 16V 100kW/134HP ME7.9.7
Standaard vermogen136 CV / 1 kW
Cilinderinhoud2000 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelME7.9.7
Geheugen / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Beschikbare tuning-opties:

  • Advance at part load
  • Lambda correction
  • Load / throttle position reference
  • Injection at part load
  • Injection at full throttle
  • Advance limiter
  • Torque limiter
  • RPM Limiter
  • Air mass flow

Firmware-identificatoren (1)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
0261201613 1.42.003 BOSCH ME7.9.7

ECU-notities

Original EPROM PSOP 44 pins 29F800BB. To work on this ECU you can use NewTrasdata In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!