CASE IH QUADTRAC 600 12.9L 447kW/599HP EDC17CV41

ECU BOSCH EDC17CV41 · 608 CV (447 kW) · 12900 cc · Diesel sovralimentato

ECU-databaseCASE IH › CASE IH QUADTRAC 600 12.9L 447kW/599HP EDC17CV41

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 8 firmwareversies

Voertuiggegevens

MerkCASE IH
ModelQUADTRAC
Motor600 12.9L 447kW/599HP EDC17CV41
Standaard vermogen608 CV / 447 kW
Cilinderinhoud12900 cc
BrandstofDiesel sovralimentato
VoertuigtypeTractor

ECU

FabrikantBOSCH
ModelEDC17CV41
Geheugen / EPROMMICRO ST TRICORE - 32768 Kbit - 400000

Beschikbare tuning-opties:

  • Boost pressure limiter
  • Boost pressure
  • Displacement
  • Desired fuel quantity map for open loop
  • Exhaust gas temperature 2
  • Max CAT temperature threshold for component protection
  • Basic torque management at engine cranking
  • Injection period
  • Injection opening time related to inj. pressure
  • Injection mass at high temperature
  • Injection mass at low temperature
  • Maximum fuel quantity for turbine overspeed prevention
  • Injection limit - turbocharger protection
  • Max injection limit
  • Fuel quantity limitation after cold start
  • Torque limiter 2
  • Torque limiter
  • Torque limiter during particulate filter overloading - pressure
  • Lambda value of the smoke limitation
  • MAP - limp home mode
  • Maximum absolute effective torque
  • Maximum indicated torque
  • Max torque profile
  • Injection quantity for engine overheating protection
  • Injection quantity for engine overheating protection 3
  • Pressure control map over pressure regulating valve
  • Specific injection pressure limiter
  • Specific injection pressure limiter 3
  • Specific injection pressure limiter 4
  • Specific injection pressure limiter for diagnostics
  • Specific injection pressure limiter for EFT sensor
  • Rail pressure threshold for torque limitation
  • Specific injection pressure
  • CAT downstream temperature sensor characterization
  • CAT upstream temperature sensor characterization
  • DPF downstream temperature sensor characterization
  • DPF upstream temperature sensor characterization
  • SCR downstream temperature sensor characterization
  • SCR upstream temperature sensor characterization
  • Torque limiter for EFT sensor
  • Torque limiter in recovery mode
  • Torque limiter in recovery mode 2
  • Torque limiter in recovery mode 3
  • Torque limiter in recovery mode 5
  • Torque limiter in recovery mode 6
  • Torque model - torque to fuel quantity conversion
  • Torque model for performance limiter
  • Torque model with performance limiter stage 1 is active
  • Torque model with performance limiter stage 2 active
  • Torque model with performance limiter after coldstart 1 active
  • Torque model with performance limiter after coldstart 2 active
  • Turbocharger volumetric efficiency

Firmware-identificatoren (8)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
P_662_EDC17CV41_631.hex 1.00.0136.3.1 Dbmsei36.ct3 BOSCH EDC17CV41
P_662_EDC17CV41_631.hex 1.00.0316.3.1 Dbmsei32.ct3 BOSCH EDC17CV41
P_662_EDC17CV41_631.hex 1.00.0196.3.1 Dbmsei32.ct3 BOSCH EDC17CV41
P_662_EDC17CV41_631.hex 1.00.0136.3.1 Dbmsei37.ct3 BOSCH EDC17CV41
P_662_EDC17CV41_631.hex 1.00.0156.3.1 Dbmsei30.ct3 BOSCH EDC17CV41
P_662_EDC17CV41_622.hex 1.00.0176.2.2 Dbmseh10.ct4 BOSCH EDC17CV41
P_662_EDC17CV41_631.hex 1.00.0176.3.1 Dbmsei37.ct3 BOSCH EDC17CV41
P_662_EDC17CV41_631.hex 1.00.0146.3.1 Dbmsei37.ct3 BOSCH EDC17CV41

ECU-notities

MICRO Infineon Tricore TC1797 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata

Aanvullende modules beschikbaar

→ See all add-on modules on the shop