CASE IH MAGNUM EP 290 8.7L 233kW/313HP EDC7UC31

ECU BOSCH EDC7UC31 · 317 CV (233 kW) · 8700 cc · Diesel sovralimentato

ECU-databaseCASE IH › CASE IH MAGNUM EP 290 8.7L 233kW/313HP EDC7UC31

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 16 firmwareversies

Voertuiggegevens

MerkCASE IH
ModelMAGNUM EP
Motor290 8.7L 233kW/313HP EDC7UC31
Standaard vermogen317 CV / 233 kW
Cilinderinhoud8700 cc
BrandstofDiesel sovralimentato
VoertuigtypeTractor

ECU

FabrikantBOSCH
ModelEDC7UC31
Geheugen / EPROMM58BW016DB PQFP80 - Flash 3_V 512 x 32

Beschikbare tuning-opties:

  • Boost pressure limiter
  • Boost pressure limiter 2
  • Boost pressure
  • Boost pressure 2
  • Boost pressure F (temperature)
  • Desired fuel quantity map for open loop
  • EGR valve control
  • Exhaust gas temperature
  • Max CAT temperature threshold for component protection
  • Basic torque management at engine cranking
  • Gearbox maximum torque allowed
  • Injection period
  • Injection opening time related to inj. pressure
  • Injection mass at high temperature
  • Injection mass at low temperature
  • Maximum fuel quantity for turbine overspeed prevention
  • Injection limit - turbocharger protection
  • Max injection limit
  • Max injection limit 2
  • Fuel quantity limitation after cold start
  • Max injection limit - limp mode
  • L
  • Torque limiter
  • Torque limiter during particulate filter overloading - pressure
  • Lambda value of the smoke limitation
  • MAP - limp home mode
  • Maximum indicated torque
  • Max torque profile
  • Injection quantity for engine overheating protection
  • Injection quantity for engine overheating protection 2
  • Protection for fuel overheating
  • Specific injection pressure limiter
  • Specific injection pressure limiter for diagnostics
  • Specific injection pressure
  • Specific injection pressure 2
  • Specific injection pressure in aftertreatment modes
  • Driver torque request
  • Torque limiter for selected gear
  • Torque limiter in recovery mode
  • Torque model - torque to fuel quantity conversion
  • Torque model for performance limiter
  • Torque model with performance limiter stage 1 is active
  • Torque model with performance limiter stage 2 active
  • Torque model with performance limiter after coldstart 1 active
  • Torque model with performance limiter stage 3 active
  • Turbocharger volumetric efficiency

Firmware-identificatoren (16)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
1.67.007P340VF01 Mxkcyg27.ck3 BOSCH EDC7UC31
1.67.007P340VF01 Mxkcyg23.ck3 BOSCH EDC7UC31
1.67.010P340VE02 Mxkcyc17.ck3 BOSCH EDC7UC31
1.67.006P340VF01 Mxkcyg26.ck4 BOSCH EDC7UC31
1.67.005P340VF01 Mxkcyg22.ck4 BOSCH EDC7UC31
1.67.010P340VF01 Mxkcyg27.ck3 BOSCH EDC7UC31
1.67.007P340VF01 Mxkcyg25.ck3 BOSCH EDC7UC31
1.67.006P340VF01 Mxkcyg21.ck4 BOSCH EDC7UC31
1.67.010P340VD03 Mxkcyb04.ck1 BOSCH EDC7UC31
1.67.012P340VF01 Mxkcyg25.ck4 BOSCH EDC7UC31
1.67.011P340VD03 Mxkbyb04.ck1 BOSCH EDC7UC31
1.67.016P340VF01 Mxkcyg21.ck3 BOSCH EDC7UC31
1.67.006P340VD03 Mxkcyb07.ck1 BOSCH EDC7UC31
1.67.006P340VF01 Mxkcyg22.ck3 BOSCH EDC7UC31
1.67.006P340VF01 Mxkcyg26.ck3 BOSCH EDC7UC31
1.67.008P340VE02 Mxkcyc17.ck3 BOSCH EDC7UC31

ECU-notities

To work on this ECU you can use NewTrasdata This Setting File can be used for serial programming system NewGenius.

Aanvullende modules beschikbaar

→ See all add-on modules on the shop