CASE IH MAGNUM EP 235 8.3L 175kW/235HP EDC7UC31

ECU BOSCH EDC7UC31 · 238 CV (175 kW) · 8300 cc · Diesel sovralimentato

ECU-databaseCASE IH › CASE IH MAGNUM EP 235 8.3L 175kW/235HP EDC7UC31

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 10 firmwareversies

Voertuiggegevens

MerkCASE IH
ModelMAGNUM EP
Motor235 8.3L 175kW/235HP EDC7UC31
Standaard vermogen238 CV / 175 kW
Cilinderinhoud8300 cc
BrandstofDiesel sovralimentato
VoertuigtypeTractor

ECU

FabrikantBOSCH
ModelEDC7UC31
Geheugen / EPROMM58BW016DB PQFP80 - Flash 3_V 512 x 32

Beschikbare tuning-opties:

  • Boost pressure limiter
  • Boost pressure limiter 2
  • Boost pressure
  • Boost pressure 2
  • Boost pressure F (temperature)
  • Desired fuel quantity map for open loop
  • EGR valve control
  • Exhaust gas temperature
  • Max CAT temperature threshold for component protection
  • Basic torque management at engine cranking
  • Gearbox maximum torque allowed
  • Injection period
  • Injection opening time related to inj. pressure
  • Injection mass at high temperature
  • Injection mass at low temperature
  • Maximum fuel quantity for turbine overspeed prevention
  • Injection limit - turbocharger protection
  • Max injection limit
  • Max injection limit 2
  • Fuel quantity limitation after cold start
  • Max injection limit - limp mode
  • L
  • Torque limiter
  • Torque limiter during particulate filter overloading - pressure
  • Lambda value of the smoke limitation
  • MAP - limp home mode
  • Maximum indicated torque
  • Max torque profile
  • Injection quantity for engine overheating protection
  • Injection quantity for engine overheating protection 2
  • Protection for fuel overheating
  • Specific injection pressure limiter
  • Specific injection pressure limiter for diagnostics
  • Specific injection pressure
  • Specific injection pressure 2
  • Specific injection pressure in aftertreatment modes
  • Driver torque request
  • Torque limiter for selected gear
  • Torque limiter in recovery mode
  • Torque model - torque to fuel quantity conversion
  • Torque model for performance limiter
  • Torque model with performance limiter stage 1 is active
  • Torque model with performance limiter stage 2 active
  • Torque model with performance limiter after coldstart 1 active
  • Torque model with performance limiter stage 3 active
  • Turbocharger volumetric efficiency

Firmware-identificatoren (10)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
1.67.006P340VF01 Mxkdyg26.ck3 BOSCH EDC7UC31
1.67.007P340VF01 Mxkdyg27.ck3 BOSCH EDC7UC31
1.67.017P340VE02 Mxkdyc17.ck3 BOSCH EDC7UC31
1.67.007P340VF01 Mxkdyg22.ck3 BOSCH EDC7UC31
1.67.013P340VD03 Mxkdyb04.ck1 BOSCH EDC7UC31
1.67.012P340VF01 Mxkdyg23.ck3 BOSCH EDC7UC31
1.67.015P340VE02 Mxkdyc17.ck3 BOSCH EDC7UC31
1.67.008P340VF01 Mxkdyg21.ck3 BOSCH EDC7UC31
1.67.005P340VF01 Mxkdyg25.ck4 BOSCH EDC7UC31
1.67.006P340VD03 Mxkdyb07.ck1 BOSCH EDC7UC31

ECU-notities

To work on this ECU you can use NewTrasdata This Setting File can be used for serial programming system NewGenius.