BMW Z4 SERIES E85/E86 Z4i 2.0L L4 16V 110kW/148HP MEV946

ECU BOSCH MEV9.2 · 150 CV (11 kW) · 2000 cc · Benzina aspirato

ECU-databaseBMW › BMW Z4 SERIES E85/E86 Z4i 2.0L L4 16V 110kW/148HP MEV946

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 10 firmwareversies

Voertuiggegevens

MerkBMW
ModelZ4 SERIES E85/E86
MotorZ4i 2.0L L4 16V 110kW/148HP MEV946
Standaard vermogen150 CV / 11 kW
Cilinderinhoud2000 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelMEV9.2
Geheugen / EPROMM58BW016DB PQFP80 - Flash 3_V 512 x 32

Beschikbare tuning-opties:

  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Injection at full throttle
  • Advance limiter
  • RPM Limiter
  • Air mass flow

Firmware-identificatoren (10)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02612011591037379569 1.75.00507568252 BOSCH MEV9.2
02612011591037377861 1.75.01307561920 BOSCH MEV9.2
02612011591037377861 1.75.01407561918 BOSCH MEV9.2
02612011601037379569 1.75.01607568676 BOSCH MEV9.2
02612011601037379569 1.75.01207568252 BOSCH MEV9.2
02612085821037379569 1.75.01207568252 BOSCH MEV9.2
02612085821037377861 1.75.00607563370 BOSCH MEV9.2
02612085821037377861 1.75.00707556466 BOSCH MEV9.2
02612085821037374622 1.75.00407556468 BOSCH MEV9.2
02612087451037374622 1.75.01007556466 BOSCH MEV9.2

Technische voertuignotities

OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.

ECU-notities

Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata WARNING! ECU MED9 - IX/CL = injection at full load, decrease the values to enrich the injection

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop