ECU-database ›
BMW › BMW X5 SERIES E70 X5 30d 3.0L L6 24V 180kW/241HP EDC17CP09
Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
✓ Aanvullende module beschikbaar 7 firmwareversies
Voertuiggegevens
| Merk | BMW |
| Model | X5 SERIES E70 |
| Motor | X5 30d 3.0L L6 24V 180kW/241HP EDC17CP09 |
| Standaard vermogen | 245 CV / 18 kW |
| Cilinderinhoud | 3000 cc |
| Brandstof | Diesel sovralimentato |
| Voertuigtype | Auto |
ECU
| Fabrikant | BOSCH |
| Model | EDC17CP09 |
| Geheugen / EPROM | MICRO ST TRICORE - 16384 Kbit - 200000 |
Beschikbare tuning-opties:
- Boost pressure limiter
- Boost pressure
- EGR valve control
- EGR valve control 2
- Max accepted exhaust gas temperature value at particulate sensor
- Exhaust gas temperature threshold for component protection
- Protection for engine overheating
- Protection for engine overheating 2
- Protection for engine overheating 3
- Basic torque management at engine cranking
- Gearbox maximum torque allowed
- Gearbox maximum torque allowed 2
- Gearbox maximum torque allowed 3
- Gearbox maximum torque allowed 4
- Injection period
- Injection period 2
- Maximum injection period
- Injection opening time related to inj. pressure
- J
- Injection 2
- Injection 3
- L
- Torque limiter 3
- Torque limiter 4
- Torque limiter 5
- Torque limiter 6
- Torque limiter
- Torque limiter for diagnostic
- Torque limiter during particulate filter overloading - pressure
- Torque limiter during particulate filter overloading - temperature
- Lambda value of the smoke limitation
- Minimum LSU sensor temperature limit - heater control
- Minimum LSU sensor temperature for O2
- Maximum LSU sensor temperature limit - heater control
- Maximum LSU sensor temperature for O2
- LSU temperature setpoint
- LSU temperature threshold PID heater governor activation
- Speed limiter
- Maximum indicated torque
- Maximum indicated torque for monitoring
- Maximum engine torque at crank shaft
- Pressure control map over pressure regulating valve
- Specific injection pressure limiter 2
- Specific injection pressure limiter 3
- Relative permissible torque from the pedal position in torque limitation
- Specific injection pressure
- Specific injection pressure 2
- Driver torque request
- Torque limiter for EFT sensor
- Turbocharger volumetric efficiency
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit 2
- Variable geometry duty cycle limit 3
- Variable geometry duty cycle limit 4
Firmware-identificatoren (7)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|
| — | 08572131 |
1.94.004 | 08572394 |
BOSCH EDC17CP09 |
| — | 08572131 |
1.94.036 | 08572392 |
BOSCH EDC17CP09 |
| — | 08517705 |
1.00.016 | 08519484 |
BOSCH EDC17CP09 |
| — | 08572131 |
1.94.006 | 08586813 |
BOSCH EDC17CP09 |
| — | 08572479 |
1.00.016 | 08574275 |
BOSCH EDC17CP09 |
| — | 08517705 |
1.00.015 | 08570958 |
BOSCH EDC17CP09 |
| — | 08572131 |
1.94.006 | 08577228 |
BOSCH EDC17CP09 |
Technische voertuignotities
OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.
ECU-notities
MICRO Infineon Tricore TC1796 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
MICRO Infineon Tricore TC1796 To work on this ECU you can use NewTrasdata
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven
