BMW X5 SERIES E53 X5is 4.6L V8 32V 250kW/335HP DME7.1

ECU BOSCH DME 7.1 · 340 CV (25 kW) · 4600 cc · Benzina aspirato

ECU-databaseBMW › BMW X5 SERIES E53 X5is 4.6L V8 32V 250kW/335HP DME7.1

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 4 firmwareversies

Voertuiggegevens

MerkBMW
ModelX5 SERIES E53
MotorX5is 4.6L V8 32V 250kW/335HP DME7.1
Standaard vermogen340 CV / 25 kW
Cilinderinhoud4600 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelDME 7.1
Geheugen / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Beschikbare tuning-opties:

  • Advance at part load
  • Injection at part load
  • Injection at full throttle
  • Advance limiter
  • Torque limiter
  • Speed limiter
  • Load/throttle position reference - AT
  • Air mass flow

Firmware-identificatoren (4)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02612071061037365064 1.19.006 BOSCH DME 7.1
02612071061037368125 1.19.005 BOSCH DME 7.1
02612071061037351657 1.19.011 BOSCH DME 7.1
02612071061037351891 1.19.002 BOSCH DME 7.1

Technische voertuignotities

OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.

ECU-notities

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial programming system NewGenius.