BMW 7 SERIES E38 730d 3.0L L6 24V 142kW/190HP EDC15

ECU BOSCH DDE 4.0 · 193 CV (142 kW) · 3000 cc · Diesel sovralimentato

ECU-databaseBMW › BMW 7 SERIES E38 730d 3.0L L6 24V 142kW/190HP EDC15

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 6 firmwareversies

Voertuiggegevens

MerkBMW
Model7 SERIES E38
Motor730d 3.0L L6 24V 142kW/190HP EDC15
Standaard vermogen193 CV / 142 kW
Cilinderinhoud3000 cc
BrandstofDiesel sovralimentato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelDDE 4.0
Geheugen / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Beschikbare tuning-opties:

  • Boost pressure limiter
  • Boost pressure
  • Injection at part load
  • Injection at full throttle
  • Torque limiter
  • Smoke limiter
  • Speed limiter
  • Air mass flow
  • Overboost timing

Firmware-identificatoren (6)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02810018301037350667 1.03.011 BOSCH DDE 4.0
02810018301037359328 1.03.015 BOSCH DDE 4.0
02810103141037351265 1.03.025 BOSCH DDE 4.0
0281010XXX1037351761 1.03.018 BOSCH DDE 4.0
0281010XXX1037351632 1.03.006 BOSCH DDE 4.0
0281010XXX1037351513 1.03.003 BOSCH DDE 4.0

ECU-notities

Original EPROM PSOP 44 pins 29F400BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This Setting File can be used for serial system NewGenius. On this epron can be set a KEY.
Original EPROM PSOP 44 pins 29F400BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This Setting File can be used for serial system NewGenius.

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):