BMW 5 SERIES G30/G31/G38 530d 3.0L L6 24V 210kW/282HP DME__DDE853O

ECU BOSCH MD1CP032 (DME__DDE853O) · 286 CV (21 kW) · 3000 cc · Diesel sovralimentato

ECU-databaseBMW › BMW 5 SERIES G30/G31/G38 530d 3.0L L6 24V 210kW/282HP DME__DDE853O

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 1 firmwareversies

Voertuiggegevens

MerkBMW
Model5 SERIES G30/G31/G38
Motor530d 3.0L L6 24V 210kW/282HP DME__DDE853O
Standaard vermogen286 CV / 21 kW
Cilinderinhoud3000 cc
BrandstofDiesel sovralimentato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelMD1CP032 (DME__DDE853O)
Geheugen / EPROMMicro BGA FREESCALE - 8192 Kbit - 800000

Beschikbare tuning-opties:

  • Boost pressure limiter
  • Boost pressure limiter 2
  • Boost pressure limiter 3
  • Boost pressure limiter 4
  • Boost pressure limiter 5
  • Maximum engine boost pressure F (atmospheric pressure)
  • Maximum engine boost pressure F (atmospheric pressure) 2
  • Boost pressure
  • Boost pressure 2
  • Boost pressure 3
  • Boost pressure 4
  • Boost pressure 5
  • Boost pressure 6
  • Boost pressure 7
  • Boost pressure 8
  • Protection for cylinder head overheating
  • Maximum torque limitation at clutch
  • Max accepted exhaust gas temperature value at particulate sensor
  • Protection for engine overheating
  • Injection period
  • Injection period 3
  • Maximum injection period
  • Injection opening time related to inj. pressure
  • Injection 1
  • J
  • Injection 3
  • Injection 4
  • Injection 5
  • Injection 6
  • Injection 7
  • Torque limiter 10
  • Torque limiter 2
  • L
  • Torque limiter 4
  • Torque limiter 5
  • Torque limiter 6
  • Torque limiter 7
  • Torque limiter 8
  • Torque limiter 9
  • Torque limiter 1-2 gear
  • Protection for fuel overheating
  • Specific injection pressure limiter
  • Specific injection pressure
  • Specific injection pressure 2
  • Specific injection pressure 3
  • Specific injection pressure 5
  • Torque limit table for ECT sensor
  • Variable geometry duty cycle limit

Firmware-identificatoren (1)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
000044DA0D1100000044DB0D1100 1.94.00600007AF90D1101 BOSCH MD1CP032 (DME__DDE853O)

ECU-notities

Microprocessor BGA FREESCALE SPC57xxx This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata