ECU-database ›
BMW › BMW 5 SERIES F10/F11/F18 523i 2.0L L4 16V 150kW/201HP MEVD17.2.4
Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
✓ Aanvullende module beschikbaar 2 firmwareversies
Voertuiggegevens
| Merk | BMW |
| Model | 5 SERIES F10/F11/F18 |
| Motor | 523i 2.0L L4 16V 150kW/201HP MEVD17.2.4 |
| Standaard vermogen | 204 CV / 15 kW |
| Cilinderinhoud | 2000 cc |
| Brandstof | Benzina aspirato |
| Voertuigtype | Auto |
ECU
| Fabrikant | BOSCH |
| Model | MEVD17.2.4 |
| Geheugen / EPROM | MICRO ST TRICORE - 32768 Kbit - 400000 |
Beschikbare tuning-opties:
- Base timing
- Optimal spark timing/MBT
- Boost pressure
- Boost pressure 2
- Desired engine load calculation
- Maximum torque limitation at clutch
- Characteristic line correction factor for pressure ratio for turbocharger overspeed protection
- Gearbox maximum torque allowed
- HFM/HLM threshold for diagnosis
- High pressure fuel pump setpoint
- Intake valve lift
- Intake valve lift - full load
- L
- Torque limiter 4
- Torque limiter for diagnostic
- Lambda enrichment for components protection
- RPM Limiter
- RPM Limiter 2
- RPM limit for ECT sensor
- Boost pressure linearization
- Lambda driver wish
- Knock detection factor
- Speed limiter
- Throttle air mass flow calculation
- Manifold absolute pressure time delay
- Characteristic manifold absolute pressure time constant of the LRS
- Optimal engine moment
- Pressure ratio depending on IAT
- Maximum pressure ratio limit depending on temperature
- Maximum pressure ratio limit depending on ECT
- Requested engine filling
- Driver torque request
- Wastegate duty-cycle
Firmware-identificatoren (2)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|
| 00001243032701 | 00000ABF3B9101 |
1.98.016 | 0000139B3B9102 |
BOSCH MEVD17.2.4 |
| 00001243032701 | 00000ABF3B9601 |
1.98.002 | 0000139B3B9601 |
BOSCH MEVD17.2.4 |
Technische voertuignotities
OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.
ECU-notities
MICRO Infineon Tricore TC1797 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven
